top images
Extranet Contact Us Support Downloads Deutsch English Français Česky Русский

TIMBER Pro 7.xx

Design of Timber Members and Sets of Members 
The program TIMBER Pro is integrated into the user interface of the framework program RSTAB as an optional add-on module. TIMBER Pro designs timber members and sets of members according to new design procedures in the following standards:
  •  EN 1995-1-1:2004-11+A1:2008
  •  SIA 265:2003
  •  DIN 1052:2008-12
A comprehensive cross-section library and an extendable material library are available, including specific parameters given by a relevant standard.

The TIMBER Pro module carries out the ultimate limit state design and serviceability limit state design. The stability analysis, either by means of the equivalent member method or the second order theory, is also included in the calculation process. In addition, the fire resistance design is available.
In TIMBER Pro, you can optimize cross-sections and export them to RSTAB.
Program Features
  • Full integration into RSTAB with a possibility to import all relevant data and internal forces
  • Analysis and design are carried out according to EN 1995-1-1:2004-11+A1:2008 (Eurocode 5), SIA 265:2003 or DIN 1052:2008-12
  • For the standard EN 1995-1-1, the following national annex documents (NAD) are available:
    •  BS EN 1995-1-1/NA:2006 (Great Britain)
    •  ÖNORM B 1995-1-1:2009-07 (Austria)
    •  CSN EN 1995-1-1/NA:2007-09  (Czech Republic)
    •  DK EN 1995-1-1/NA:2007-11 (Denmark)
    •  SFS EN 1995-1-1/NA:2007-11 (Finland)
    •  DIN EN 1995-1-1/NA:2009-04 (Germany)
    •  UNI EN 1995-1-1/NA:2007-07 (Italy)
  • Comprehensive material library according to EN, SIA, and DIN standards
  • Characteristic strength values for gluelam timber can be increased optionally according to comments in a selected standard
  • Structures are assigned to service classes (SECL) specifically, and actions are classified to load duration classes (LDC)
  • Deformation analysis of members, sets of members, and member lists
  • Analysis of stability by means of the equivalent member method or according to the second order theory
  • Calculation of governing internal forces
  • Information icon about the given design – successful or failed
  • Visualization of the design criterium on the RSTAB model
  • Filtering of graphical results and colored reference scales in result tables
  • RSTAB work window and TIMBER Pro tables are synchronized during graphical selection of a current member
  • View mode for modifying the RSTAB visualization
  • Opmitization of cross-sections and export of optimized cross-sections to RSTAB
  • Parts list and quantity surveying
  • Direct data export to MS Excel
  • Design of round and rectangular cross-sections
  • Fire resistance design can be carried out according the following standards:
    •  EN 1995-1-2:2004+AC:2006-06
    •  SIA 265:2003
    •  DIN 4102-22:2004
  • Free choice of the fire resistance class and charring rate
  • Exposure to fire can be specified on four sides
  • Import of buckling lengths and lateral buckling lengths from the module RSBUCK
  • For tapered members, additional analyses are done according to a selected standard
  • In case a ridge has been defined, the ridge design and analysis of transversal tension stresses are carried out as well
Integrated Standards and National Annexes in TIMBER Pro
 
Input

After opening the module, you specify the members or sets of members that you want to design manually by numbers or you can pick them graphically. Then you choose the relevant load cases, load groups or load combinations for the ultimate and serviceability limit state design and also for the fire resistance design. The materials defined in RSTAB are already preset, but you can change them in TIMBER Pro. Material properties according to a relevant standard are stored in the library.

After checking the cross-sections, you assign the load duration classes (LDC) and the service classes (SECL) to selected load cases resp. members.

If the stability analysis is carried out according to the equivalent member method, you must define effective lengths for members and sets of members. The preset lenghts can can be modified directly or by means of the coefficient ß.

For the deformation analysis, you must specify reference lenghts of the relevant members and sets of members, considering the displacement direction, precamber, and beam type.

For the fire resistance design, TIMBER Pro allows detailed specifications, for example exposure to fire on selected sides.
Table 1.1 General Data: Ultimate Limit State Design
 
Analysis

When designing the cross-section resistance, TIMBER Pro analyzes tension and compression along the grain, bending, bending and tension/compression, and also shear due to a shear force with and without torsion. The analysis proceeds at the level of design stress values.

For the design of members subjected to buckling or lateral buckling, according to the equivalent member method, the program considers axial compression, bending with and without a compressive force, and also bending and tension. Deflection for inner spans and cantilevers is determined in characteristic and quasi-permanent design situations.

You can analyze selected members, sets of members, and loads flexibly in separate design cases. The stability analyses can proceed in separate design cases as well.
RS-Solver: Analysis, Partial Steps
 
Results and Output

After the successful analysis, results are divided into synoptic tables. You can read every intermediate value, thereby the design becomes transparent. The results are listed by load case, cross-section, member or set of members.

If the analysis fails, you can modify the relevant cross-sections in an optimization process. You can transfer optimized cross-sections to RSTAB to recalculate them.

The stress ratio is represented graphically by different colors on the RSTAB model. Thus, overdesigned or crucial areas of the structure can be recognized at a glance. Moreover, result diagrams for specific members and sets of members allow a targeted evaluation.

You can incorporate TIMBER Pro input and result tables with all design details and all graphics to the RSTAB printout report. In this way, follow-up and schematic documentation is provided.
RSTAB and TIMBER Pro Results: Comparison
 

QUICKSEARCH

Note

You can find more information about TIMBER Pro here:

list image Hotline
list image Training

Demo version of RSTAB 7.xx with add-on modules
Try out RSTAB yourselves and download a free demo version of RSTAB and its add-on modules.
[Page with downloads...]

Request information
Download our new brochure about all Dlubal products in the PDF format. Alternatively, we can send you the brochure including a demo DVD directly by mail.
[Free materials...]

Price Information

Net prices in €
1st license
TIMBER Pro 1,250.00
Additional license
TIMBER Pro 562.50
list image Pricelist
Table 1.1 General Data: Serviceability Limit State Design
Table 1.1 General Data:
Serviceability Limit State Design
Table 1.1 General Data: Fire Resistance Design
Table 1.1 General Data:
Fire Resistance Design
Table 1.2 Materials
Table 1.2 Materials
Table 1.3 Cross-Sections
Table 1.3 Cross-Sections
Table 1.4 Load Duration and Service Class
Table 1.4 Load Duration
and Service Class
Table 1.6 Effective Lengths - Sets of Members
Table 1.6 Effective Lengths
- Sets of Members
Table 1.8 Serviceability Data
Table 1.8 Serviceability Data
Table 1.9 Input for Fire Protection Design
Table 1.9 Input for Fire Protection Design
Table 2.1 Design by Load Case
Table 2.1 Design by Load Case
Table 2.4 Design by Member
Table 2.4 Design by Member
Table 3.1 Governing Internal Forces by Member
Table 3.1 Governing Internal
Forces by Member
Calculation Details for EN 1995-1-1:2004
Calculation Details
for EN 1995-1-1:2004
Display of Colored Results in RSTAB
Display of Colored Results
in RSTAB
TIMBER Pro Results in RSTAB Printout Report
TIMBER Pro Results
in RSTAB Printout Report