Extranet | Actualités | Support | Contactez-nous | Avis juridique
Deutsch | English | Français | Español | Português | Italiano | Česky | Polski | Русский  

Thèses de fin d'étude

…notre logiciel - parfait pour la recherche et l'éducation 

11. Mémoire de fin d'étude Kurtovic Husein

Sujet Designing a maintenance hangar
Auteur Kurtovic Husein
Adresse Boxgraben 123
52064 Aachen
Institut Fachhochschule Aachen
Responsable Prof. Dr.-Ing. Lohse
Prof. Dr.-Ing. Kappler
Date 02.06.2009
Programmes et modules utilisés RSTAB, Zusatzmodule
Sommaire
> Télécharger
Autres ...thank you very much for providing me with the program that I used for my thesis. The complex construction of the maintenance hangar that I have designed and calculated was easy to handle due to the efficient programs from Tekla (X-Steel) and Dlubal (RSTAB) and the shared interfaces...

12. Mémoire de fin d'étude Sören Müller

Sujet About the stability behavior of steel mesh domes prone to imperfections
Auteur Sören Müller
Institut Hochschule Karlsruhe
Technik und Wirtschaft
Responsable Prof. Dr. Eur.-Ing. Marcus Aberle
Date 25.06.2009
Programmes et modules utilisés RSTAB, Zusatzmodule
Nombre de pages 75
Sommaire
> Télécharger
Description ... In 1992, the community of Halstenbek near Hamburg, Germany, decided to build a gymnasium. It was agreed to design a double curved and transparent steel mesh dome. The supporting structure broke down already during its mounting. In 1998, only a few weeks before it should be opened, it broke down again. The present thesis analyzes the second collapse of the dome of Halstenbek...

... Based on different geometric, non-linear calculations using the computer program RSTAB, the thesis wants to find out if the second dome collapse could have been mathematically predictable...

... Finally, it was proved in the thesis that the dome would also have been collapsed to a later point in time even in case of a correct mounting if the outdoor temperature had been higher...

13. Mémoire de fin d'étude Kurt Wagner

Sujet Calculating a garden shed according to the Canadian standard
Auteur Kurt Wagner
Institut UBC Vancouver
Responsable Prof. Nebgen
Programmes et modules utilisés RSTAB/Cadwork
Nombre de pages 131
Description Calculation and production of a garden shed according to Canadian standard including market research studies

14. Mémoire de fin d'étude Jarmila Böjtiová

Auteur Jarmila Böjtiová
Institut Slovenská Technická univerzita v Bratislave
Responsable Ing. Iyad Abrahoim, PhD.
Date 29.06.2008
Programmes et modules utilisés RFEM, Zusatzmodule
Nombre de pages 155
Sommaire
> Télécharger
Autres ... many thanks for providing me with the program and for the support given by your hotline. During the past 5 months, I learned to use your RFEM 3 program and all the add-on modules. I must say that RFEM 3 is easy to work with. It's a comfortable and relaxed work, beautiful graphics and a great range of possibilities in the program...

15. Thèse de séminaire Sonja Eberhard

Sujet Replacing the superstructure of the bridge construction K5 in steel
Auteur Sonja Eberhard
Adresse Broitzemer Straße 8
38118 Braunschweig
Institut Technische Uni Carolo-Wilhelmina, Braunschweig
Responsable Prof. Dr.-Ing. Udo Peil
Date 15.01.2009
Programmes et modules utilisés RFEM, RSTAB, Zusatzmodule
Nombre de pages 108
Sommaire
> Télécharger
Description ... The design of an invented bridge construction is a typical topic for a seminar paper in a civil engineering subject specializing in structural analysis. In order to vary this structural task closer to reality, the paper is based on a structure that exists in reality...
Autres ...I thank you for giving me your software for my seminar paper. The comprehensive support provided by your hotline when creating the model and evaluating the results was of great help for me...

16. Mémoire de fin d'étude Sebastian Weiß

Sujet Preparing teaching materials for specific topics in structural mechanics in connection with the finite element method (FEM)
Auteur Sebastian Weiß
Adresse Großenhainer Straße 237
01129 Dresden
Institut Hochschule für Technik und Wirtschaft Dresden
Responsable Prof. Dr.-Ing. Christian Barth
Prof. Dr.-Ing. habil. Mirko Slavik
Date 14.10.2008
Programmes et modules utilisés RSTAB, RFEM, Zusatzmodule
Nombre de pages 143
Sommaire
> Télécharger
Description ...based on the knowledge required for the calculation of structural systems, stability and dynamic analysis of planar, two-dimensional frameworks imparted during civil engineering studies, as well as on the basic knowledge of the finite element analysis, the present thesis tries to focus on the most important facts...
Autres ...I want to thank the people from the Dlubal company for their quick and professional answering to my questions as well as for providing me with the RSTAB and RFEM software....

17. Thèse de maîtrise Matthias Pick

Sujet Earthquake-resistant construction of steel buildings
Auteur Matthias Pick
Adresse Bismarckstraße 2A
76133 Karlsruhe
Institut Hochschule Karlsruhe
Technik und Wirtschaft
Responsable Prof. Dr.-Ing. Markus Baumann
Date 03.10.2008
Programmes et modules utilisés RSTAB, Dynamik-Module
Nombre de pages 215
Sommaire
> Télécharger
Description The thesis represents an introduction into the complex field of anti-seismic construction. It was written due to the need for more background knowledge, in particular with regard to the present rules and specifications such as EC 8 and DIN 4149 (2005). Thus, the thesis focuses on practical activities of a civil engineer, that means the use and application of available knowledge in real situations.
First, the thesis describes important seismological basics and significant relations between earthquakes, design resistance and ductility. Then, the thesis provides an overview about the anti-seismic design of high-rise buildings with the focus on steel constructions. In order to explain the calculation methods, the paper continues with important basics of structural dynamics by means of a general and methodical description and a VBA program. At the end of the thesis, a design example for a steel construction is shown, where the gained knowledge is presented.

18. Mémoire de fin d'étude Christian Käsweber

Sujet Creating a concept for the CNC production of balcony railings taking into account structural analysis, timber preservation and cost-effectiveness
Auteur Christian Käsweber
Adresse Fuchsweberstraße 6
83115 Neubeuern
Institut Fachhochsule Rosenheim
FB Holztechnik
Responsable Prof. Dr. Claus Wagner
Prof. Dr. Martin Illner
Date 30.07.2008
Programmes et modules utilisés RSTAB, Zusatzmodule
Nombre de pages 104
Sommaire
> Télécharger
Description ... By using CNC technology for the production of structural components for balcony railings, manufacturers aim to ensure a production that is as high and precise as possible. The costumer has always a wide range of options available for selection, always based on a basic motor vehicle. Furthermore, this leads very early to a high degree of pre-fabrication. Then, the structural components should be mounted in such a way that they only need to be assembled, similar to an assembly set. Thus, manual modifications and potential for errors resulting from these modifications are supposed to be avoided as far as possible. Moreover, the individual structural components in the corresponding versions should be exchangeable in any order. Therefore, several connections of horizontal beams on vertical struts will be uniformly standardized...

19. Mémoire de fin d'étude André Erdel

Sujet Design and technical preparation of a factory with administrative building and storage
Auteur André Erdel
Adresse Kerpenstraße 23
66557 Illingen
Institut Hochschule für Technik und Wirtschaft des Saarlandes
FB Bauingenieurwesen
Responsable Prof. Dr.-Ing. I. Düsing
Date 28.08.2008
Programmes et modules utilisés RSTAB, Zusatzmodule
Nombre de pages 400
Sommaire
> Télécharger
Description ... An industrial enterprise plans to build a new house for its factory building to be a steel construction, including a crane with a weight of 100 to and an adjoining wing for storage as well as the erection of a three-story administrative building in the form of a composite steel and concrete structure.

The thesis includes the following topics:
Diseño del proyecto of the planned construction project
General drawing of the building design
Complete structural analysis and design of the building layout
Drawing of all important structural components
Autres ... thank you very much that you have provided me with your software...

20. Mémoire de fin d'étude Simon Metzger

Sujet Design and structural analysis of a conveying bridge as framework construction
Auteur Simon Metzger
Adresse Renckstraße 3
76133 Karlsruhe
Date 01.09.2008
Programmes et modules utilisés RSTAB, RFEM, Zusatzmodule
Nombre de pages 112
Sommaire
> Télécharger
Description ... This thesis describes the design and structural analysis of a conveyor bridge built as framework construction for a coal-fired power station, considering an easy assembly and economic efficiency. For the conveyance of coal from the coal resources to the coal storage tower, a conveying bridge is built across a river channel that is 105 m long. The bridge, when it is mounted, must resist actions like wind, self-weight and snow. Therefore, a three-dimensional frame structure was selected as framework construction. However, problems such as the assembly above water must be already solved during the planning phase.

Subject of this thesis, after a short introduction into different framework systems and the subsequent design phase, is the structural analysis of the entire structure according to the state-of-the-art. As the bridge, with a width of 8.8 m, is a rather filigree construction, the design of wind generated vibrations is performed in addition to the general stress design and the ultimate limit state design. Furthermore, the bridge connections to the concrete foundations are calculated and dimensioned.
Autres ... thank you very much for providing me with the programs RSTAB and RFEM so that I could write my thesis....

NOTE

De nombreuses universités et collèges dans le monde entier utilisent nos logiciels dans leurs cours d'ingénierie.

Les problèmes simples peuvent être résolus en utilisant uniquement les versions démo de RSTAB et RFEM. Ainsi, les étudiants peuvent obtenir rapidement une idée des déformations et de la distribution qualitative des forces internes déterminates.

Les étudiants ont également la possibilité d'utiliser tous nos programmes gratuitement. Si vous êtes impliqué dans l'enseignement supérieur, vous pouvez jeter un coup d'oeil à nos Conditions spéciales.

Ici vous trouverez des versions démo à télécharger.
Téléchargement
Ici vous pouvez commander des documents plus détaillés et des versions démo gratuites de RSTAB et RFEM.

RFEM - Galérie des structuresRSTAB - Galérie des structures
Suivez nous sur:   Facebook   Google+   YouTube   LinkedIn   Blog      E-mail
© 2012 Ing. Software Dlubal GmbH - Tous les droits reservés