Verify that a beam of different cross-sections made of Alloy 6061-T6 is adequate for the required load, in accord with the 2020 Aluminium Design Manual.
Verification Example 001012 | 6
Number of Nodes | 4 |
Number of Lines | 2 |
Number of Members | 2 |
Number of Load Cases | 1 |
Total Weight | 0.005 tons |
Dimensions | 7.12 x 12.12 x 2.12 feet |
Program Version | 5.24.02 |
You can download this structural model to use it for training purposes or for your projects. However, we do not assume any guarantee or liability for the accuracy or completeness of the model.
In the Construction Stages Analysis (CSA) add-on, you can use built-up cross-sections by applying the phase sections. This allows you to activate and deactivate the parts of the "Parametric - Massive II" section type throughout the construction stages.
Do you have individual column sections and angled wall geometries, and need punching shear design for them?
No problem. In RFEM 6, you can perform punching shear design not only for rectangular and circular sections, but for any cross-section shape.
In the Geotechnical Analysis add-on, the Hook-Brown material model is available. The model shows linear-elastic ideal-plastic material behavior. Its nonlinear strength criterion is the most common failure criterion for rocks.
Material parameters can be entered via
- the rock parameters directly or alternatively via
- the GSI classification
described.
Weiterführende Informationen zu diesem Materialmodell und der Definition der Eingabe in RFEM finden Sie im entsprechenden Kapitel Hoek-Brown Model im Online-Handbuch für das Add-On Geotechnische Analyse.
Using the "Beam Panel" thickness type, you can model timber panel elements in 3D space. You just specify the surface geometry and the timber panel elements are generated using an internal member-surface construct, including the simulation of the connection flexibility.