A steel beam with a square cross-section is loaded with an axial force and distributed loading. The image shows the calculation of the maximum bending deflection and critical load factor according to the second-order analysis.
Stability of Beam Subjected to Combined Loading
Downloads
Do you have any questions?
Length: 00:00:26 min
Length: 01:09:33 min
Length: 00:00:44 min
Knowledge Base
Length: 00:00:53 min
Length: 00:00:28 min
Length: 00:00:51 min
Customer Project
Length: 00:00:11 min
Length: 00:02:00 min
If a member is supported laterally to prevent buckling due to a compressive axial force, it must be ensured that the lateral support is actually able to prevent buckling. Therefore, the aim of this article is to determine the ideal spring stiffness of a lateral support using the Winter model.
This technical article analyzes the effects of the connection stiffness on the determination of internal forces, as well as the design of connections using the example of a two-story, double-spanned steel frame.
With the RF-STABILITY and RSBUCK add-on modules for RFEM and RSTAB, it is possible to perform eigenvalue analyses for member structures in order to determine the effective length factors. The effective length coefficients can then be used for the stability design.
Critical load factors and the corresponding mode shapes of any structure can be determined efficiently in RFEM and RSTAB, using the RF-STABILITY or RSBUCK add-on module (linear eigenvalue solver or nonlinear analysis).
Use the "Independent mesh preferred" option in the FE mesh settings to create an independent FE mesh for the integrated objects. This allows you to generate a significantly more detailed and precise FE mesh for individual objects that are integrated into one another.
In the "Edit Section" dialog box, you can display the buckling shapes of the Finite Strip Method (FSM) as a 3D graphic.
In RFEM 6 and RSTAB 9, you have the option to enter "Visual Objects" as guide objects. You can import the file formats 3ds, stl, and obj.
These objects allow you to create a better reference to the dimensions.
Do you have individual column sections and angled wall geometries, and need punching shear design for them?
No problem. In RFEM 6, you can perform punching shear design not only for rectangular and circular sections, but for any cross-section shape.
How are the effective lengths of frame columns determined in RFEM or RSTAB?
What is the critical load factor and how is it possible to determine it?
My model is unstable. What can be the cause?
Is it possible to import effective lengths from RF‑STABILITY or RSBUCK in RF‑/TIMBER Pro?
What is the difference between the RANS, URANS, and DDES turbulence models?
When performing steel design in RFEM 6 or RSTAB 9, I get the warning that the torsion is neglected in the stability design checks. What is the reason for this, and how can I avoid the warning message?
