2236x

002406

2024-03-01

Modeling and Design of Reinforced Concrete Structures in RFEM 6 and RSTAB 9

In this 60-minute webinar, we will show you how to model and design reinforced concrete structures with the structural analysis programs RFEM 6 and RSTAB 9.

Designing Reinforced Concrete Structures in RFEM 6 and RSTAB 9

Occurred

2021-11-02

2:00 PM - 3:00 PM CET

Free

Time Schedule
0:00 Introduction
3:35 Modeling a reinforced concrete structure in RFEM 6
8:30 Load input, combinatorics
18:40 Design of the reinforced concrete structure according to Eurocode 2
59:00 Documentation in the printout report

Below, under Models to Download, you can find the models presented in the webinar. This way, you will be able to independently follow the webinar step by step on the presentation model.

Dipl.-Ing. (FH) Andreas Hörold

Marketing & Public Relations

Mr. Hörold takes care of the Dlubal Software website, creates press releases and marketing materials, and moderates the German and English webinars.

Dipl.-Ing. (FH) Alexander Meierhofer

Head of Product Engineering Concrete & Customer Support

Mr. Meierhofer is the development leader of programs for concrete structures and is available for the customer support team in case of questions related to reinforced and prestressed concrete design.

Dipl.-Ing. (FH) Adrian Langhammer

Product Engineering & Customer Support

Mr. Langhammer is responsible for development in the area of reinforced concrete structures, and provides technical support to our customers.

Location

Online

Do you have any questions?

Events

2024-04-30

Online Training

RFEM 6 | Students | Introduction to Timber Design

2024-05-02

Construction Stages in Membrane Structures with RFEM 6

Webinar

Construction Stages in Membrane Structures with RFEM 6

2024-05-08

Online Training

RFEM 6 | Students | Introduction to Reinforced Concrete Design

2024-05-08

$Cross-Section Modeling and \n Stress Analysis in RSECTION 1$

Webinar

Cross-Section Modeling and Stress Analysis in RSECTION 1

2024-05-15

Online Training

RFEM 6 | Students | Introduction to Steel Design

2024-05-16

Consideration of Construction Stages in RFEM 6

Webinar

Consideration of Construction Stages in RFEM 6

2024-05-23

Most Frequently Asked Questions Answered by Dlubal Support Team

Webinar

Most Frequently Asked Questions Answered by Dlubal Support Team | May 2024

2024-05-29

$Steel Structures in RFEM 6 \n Part 1: Modeling, Load Input$

Webinar

Modeling and Design of Steel Structures in RFEM 6 | Part 1: Modeling, Load Input

2024-06-06

$Steel Structures in RFEM 6 \n Part 2: Combinations, Design, Documentation$

Webinar

Modeling and Design of Steel Structures in RFEM 6 | Part 2: Combinations, Design, Documentation

2024-06-20

Webinar

Most Frequently Asked Questions Answered by Dlubal Support Team | June 2024

2024-10-16

Online Training

RFEM 6 | Students | Introduction to Member Design

2024-10-23

Online Training

RSECTION 1 | Students | Introduction to Strength of Materials

Videos

Product Feature

RFEM 6 | New Structural Analysis and Design Software

Length: 00:00:00 min

Event

Calculation of Reinforced Concrete Slabs in RFEM 6

Length: 01:09:36 min

Product Feature

Design of Fiber-Reinforced Concrete

Length: 00:00:50 min

Event

Webinar | Design of Massive RSECTION Sections in RFEM 6

Length: 00:47:34 min

Product Feature

"Crosstie" Reinforcement Option for Design According to EN 1992-1-1

Length: 00:00:38 min

FAQ

FAQ 005388 | How can I activate the design with steel fiber-reinforced concrete in the "Concrete Design" add-on...

Length: 00:01:00 min

General

Structural Analysis and Design Software for Concrete Structures | RFEM 6 & RSTAB 9 by Dlubal Software

Length: 00:03:40 min

Event

Model and Design Reinforced Concrete Structures in RFEM 6 and RSTAB 9

Length: 01:06:16 min

FAQ

FAQ 005279 | Although all the member design checks have been fulfilled, I get the "Not Covered...

Length: 00:00:50 min

Playlist

Models to Download

Reinforced Concrete Beam with Cantilever

1811x

48x

Reinforced Concrete Beam with Cantilever

481x

55x

Reinforced Concrete Building

Single-Span Beam for Fiber-Reinforced Concrete Design

399x

21x

Single-Span Beam with Fiber-Reinforced Concrete as Surface Component or Frame Structure

258x

Pedestrian and Cyclist Bridge in Eichstätt, Germany

214x

22x

Concrete Bridge

258x

23x

Concrete Building

360x

70x

Angled Office Building

366x

28x

Twin Pile Cap

313x

24x

Triple Pile Cap

Knowledge Base Articles

The fatigue design according to EN 1992-1-1 must be performed for the structural components subjected to large stress ranges and/or many load changes. In this case, the design checks for the concrete and the reinforcement are performed separately. There are two alternative design methods available.

Using an example of a steel fiber-reinforced concrete slab, this article describes how the use of different integration methods and of a different number of integration points affects the calculation result.

In order to correctly design a downstand beam or a T-beam in RFEM 6 using the Concrete Design add-on, it is essential to determine the flange widths for the rib members. This article describes the input options for a two-span beam and the calculation of the flange dimensions according to EN 1992-1-1.

KB 001825 | WebService & API for Analysis of Construction Stages

When calculating regular structures, data input is often not complicated but time-consuming. Input automation can save valuable time. The task described in the present article is to consider the stories of a house as single construction stages. Data is entered using a C# program so that the user does not have to enter the elements of the individual floors manually.

Screenshots

Feature 002671 | Seismic Design of Reinforced Concrete Members According to EC 8

Result Filter for Seismic Design of Reinforced Concrete Members in RFEM

Feature 002670 | Fatigue Design According to EN 1992-1-1, Chapter 6.8

Fatigue Design According to EN 1992-1-1, Chapter 6.8 in RFEM

Defining Longitudinal Reinforcement

FAQ 005194 | Can the RFEM 6 Concrete Design add-on automatically design member and surface reinforcement?

Concrete Design Add-on - Reinforcement Design Results

Activate creep and shrinkage for concrete material

Model 004864 | Steel Structure Connection | AISC 360-22

Results of Calculation with User-Defined Basic Control Perimeter Area

RFEM Model of Palazzo Meridia Office and Retail Building in Nice, France | © Architecture-Studio

Model of Markas Headquarters, Italy | © ATP/Bause

Product Features

With the Concrete Design add-on, you can perform the fatigue design of members and surfaces according to EN 1992‑1‑1, Chapter 6.8.

For the fatigue design, you can optionally select two methods or design levels in the design configurations:

Design Level 1: Simplified design according to 6.8.6 and 6.8.7(2): The simplified design is performed for frequent action combinations according to EN 1992‑1‑1, Chapter 6.8.6 (2), and EN 1990, Eq. (6.15b) with the traffic loads relevant in the serviceability state. A maximum stress range according to 6.8.6 is designed for the reinforcing steel. The concrete compressive stress is determined by means of the upper and lower allowable stress according to 6.8.7(2).
Design Level 2: Design of damage equivalent stress acc. to 6.8.5 and 6.8.7(1) (simplified fatigue design): The design using damage equivalent stress ranges is performed for the fatigue combination according to EN 1992‑1‑1, Chapter 6.8.3, Eq. (6.69) with the specifically defined cyclic action Q_fat.

The Concrete Design add-on allows you to perform the seismic design of reinforced concrete members according to EC 8. This includes, among other things, the following functionalities:

Seismic design configurations
Differentiation of the ductility classes DCL, DCM, DCH
Option to transfer the behavior factor from a dynamic analysis
Check of the limit value for the behavior factor
Capacity design checks of "Strong column - weak beam"
Detailing and particular rules for curvature ductility factor
Detailing and particular rules for local ductility

Feature 002801 | Punching Shear Design for All Section Shapes

Do you have individual column sections and angled wall geometries, and need punching shear design for them?

No problem. In RFEM 6, you can perform punching shear design not only for rectangular and circular sections, but for any cross-section shape.

Feature 002691 | Simplified Fire Resistance Design for Columns and Beams According to EN 1992-1-2, Sections 5.3.2 and 5.6

The Concrete Design add-on provides you with the option to perform the simplified fire resistance design according to EN 1992‑1‑2 for columns (Section 5.3.2) and beams (Section 5.6).

The following design checks are available for the simplified fire resistance design:

Columns: Minimum cross-sectional dimensions for rectangular and circular sections according to Table 5.2a as well as Equation 5.7 for calculating time of fire exposure
Beams: Minimum dimensions and center distances according to Table 5.5 and Table 5.6

You can determine the internal forces for the fire resistance design according to two methods.

1 Here, the internal forces of the accidental design situation are included directly into the design.
2 The internal forces of the design at normal temperature are reduced by the factor Eta,fi (ηfi), then used in the fire resistance design.

Furthermore, it is possible to modify the axis distance according to Eq. 5.5.

Frequently Asked Questions (FAQ)

How can I use graphic templates for multi printing of a reinforcement?

How can I activate the design with steel fiber-reinforced concrete in the "Concrete Design" add-on for RFEM 6?

Although all the member design checks have been fulfilled, I get the "Not Covered Reinforcement" result. What is the reason?

In RFEM 6, is it possible to display a graphic with the distribution of the required reinforcement in the DIN A0 format?

Is it possible to display the reinforcement description in RFEM 6?

Can the RFEM 6 Concrete Design add-on automatically design member and surface reinforcement?

Customer Projects

Pedestrian and Cyclist Bridge "Herzogsteg" in Eichstätt, Germany

Front View of Office Building with V-Shaped Steel Composite Columns | © Die Tragwerker GmbH

Office Building with Integrated Visitor Center and Parking Garage in Geiselbulach, Germany

Office Building of Stadtwerke Kirchheim unter Teck, Germany

Reinforced Concrete Elevator Shaft at Montluçon Station, France

New Concert Hall in La Roche-sur-Yon, France

Residential Buildings in Trieste, Italy

Deformations of Airedale Swing Bridge in RFEM

Airedale Swing Bridge in Rodley, United Kingdom

Deformations in RFEM | © Baumruck + Oswald

AQUAtherm Indoor/Outdoor Swimming Pool in Straubing, Germany

Pedestrian Bridge "Am Freischütz" over Federal Highway 236 | © VIC Planen und Beraten GmbH | Photo: René Legrand

Freischütz Pedestrian Bridge, Germany

Recommended Products for You

RFEM 6 | Main Program RFEM 6

RFEM 6

Main Program

The new generation of 3D FEA software is used for the structural analysis of members, surfaces, and solids.

Price of First License 4,170.00 USD

RFEM 6 | Design

Concrete Design for RFEM 6

Add-On

The Concrete Design add-on allows for various design checks according to international standards. You can design members, surfaces, and columns, as well as perform punching and deformation analyses.

Price of First License 2,550.00 USD

RFEM 6 | Additional Analysis

Construction Stages Analysis (CSA) for RFEM 6

Add-On

The Construction Stages Analysis (CSA) add-on allows for considering the construction process of structures (member, surface, and solid structures) in RFEM.

Price of First License 1,570.00 USD

RFEM 6 | Additional Analysis

Geotechnical Analysis for RFEM 6

Add-On

In RFEM, the Geotechnical Analysis add-on uses properties from soil samples to determine the soil body to be analyzed. The accurate determination of soil conditions significantly affects the quality of the structural analysis of buildings.

Price of First License 1,120.00 USD

RFEM 6 | Dynamic Analysis

Modal Analysis for RFEM 6

Add-On

The Modal Analysis add-on allows for the calculation of eigenvalues, natural frequencies, and natural periods for member, surface, and solid models.

Price of First License 1,210.00 USD

RFEM 6 | Dynamic Analysis

Response Spectrum Analysis for RFEM 6

Add-On

The Response Spectrum Analysis add-on performs seismic analysis using multi-modal response spectrum analysis. The spectra required for this can be created in compliance with the standards or can be user-defined. The equivalent static forces are generated from them. The add-on includes an extensive library of accelerograms from seismic zones that can be used to generate the response spectra.

Price of First License 1,390.00 USD

RFEM 6 | Dynamic Analysis

Pushover Analysis for RFEM 6

Add-On

Using the Pushover Analysis add-on, you can analyze the seismic actions on a particular building, and thus assess whether the building can withstand an earthquake.

Price of First License 1,300.00 USD

RFEM 6 | Special Solutions

Building Model for RFEM 6

Add-On

The Building Model add-on for RFEM allows you to define and manipulate a building using stories. The stories can be adjusted in many ways afterwards. The information about stories and the entire model (center of gravity) is displayed in tables and graphics.

Price of First License 1,660.00 USD

RFEM 6 | Design

Masonry Design for RFEM 6

Add-On

The Masonry Design add-on for RFEM allows you to design masonry using the finite element method. It was developed as part of the research project titled DDMaS – Digitizing the Design of Masonry Structures. The material model represents the nonlinear behavior of the brick-mortar combination in the form of macro-modeling.

Price of First License 1,660.00 USD