FAQ 001089 EN-US

Helpful Questions & Answers

  • Frequently Asked Questions (FAQs)

This article was translated by Google Translator

View original text



Display Settings

Why is the message "Web weld as outside of recommended DIN limits" displayed, although no specifications have been selected?


The message "Web seam as outside the recommended DIN limits" appears because the guidelines for the designed end plate are not adhered to. These recommendations for the execution of welds are primarily intended as a design aid and therefore do not necessarily have to be observed. For example, welds can be made much thicker by using suitable methods.

If you want to comply with the limits, switch to the input window 1.2 and select the option to enter the end plate thickness dp . If you enter the designed thickness there, you can see the limits according to DIN under Weld .

If you select a value for the fillet weld within these limits and start the calculation again, the error report will no longer appear.

Write Comment...

Write Comment...

  • Views 99x
  • Updated 08/12/2020

Contact us

Contact Dlubal

Did you find your question?
If not, contact us via our free e-mail, chat, or forum support, or send us your question via the online form.

(267) 702-2815