FAQ 004947 EN-US

Helpful Questions & Answers

  • Frequently Asked Questions (FAQs)

After the calculation in the RF‑/DYNAM Pro - Equivalent Loads add-on module, the size of my file has increased significantly. The performance has worsened enormously. What could be the reason for this?

Answer

The RF‑/DYNAM Pro - Equivalent Loads add-on module works in the following way: It generates one load case for each eigenmode and each direction, which contains the generated equivalent loads. If activating the random torsion, the number is doubled again. Example: You have calculated 10 mode shapes and activated the X and Y directions. Now, the add-on module generates 20 load cases, and 40 load cases if activating the random torsion. The number of the generated load cases increases significantly when increasing the mode shapes to be calculated.

Therefore, you should always make sure that you keep the number of mode shapes as small as possible.

However, it often happens that a mode shape with a high effective modal mass factor only occurs after many mode shapes with small effective masses. For such cases, there is the option in the "Dynamic Load Cases" → "Mode Shapes" tab to deselect the shapes that have a small effective modal mass factor. The effect of the option is shown in the video.

It is strongly recommended to use this option in all models with many mode shapes. The limit value, from which the shapes are canceled, can be changed as desired and adapted to the special situation.

Keywords

Dynamic analysis Performance Load case Mode shape Response spectrum

Reference

Downloads

Write Comment...

Write Comment...

  • Views 169x
  • Updated 03/02/2021

Contact us

Contact Dlubal

Did you find your question?
If not, contact us via our free e-mail, chat, or forum support, or send us your question via the online form.

(267) 702-2815

info-us@dlubal.com

Online Training | English

RFEM for Students | USA

Online Training 04/21/2021 1:00 PM - 4:00 PM CDT

Online Training | English

RFEM | Basics

Online Training 04/23/2021 8:30 AM - 12:30 PM CEST

Online Training | English

RFEM | Timber | USA

Online Training 05/05/2021 1:00 PM - 4:00 PM CDT

Online Training | English

Eurocode 3 | Steel structures according to DIN EN 1993-1-1

Online Training 05/06/2021 8:30 AM - 12:30 PM CEST

Timber structures | Part 2: design

Timber Beam and Surface Structures | Part 2: Design

Webinar 05/11/2021 2:00 PM - 2:45 PM CEST

Online Training | English

Eurocode 2 | Concrete structures according to DIN EN 1992-1-1

Online Training 05/12/2021 8:30 AM - 12:30 PM CEST

Online training | English

RFEM for Students | Part 2

Online Training 05/17/2021 2:00 PM - 4:30 PM CEST

Online Training | English

Eurocode 5 | Timber structures according to DIN EN 1995-1-1

Online Training 05/20/2021 8:30 AM - 12:30 PM CEST

Online training | Arabic

RFEM | Basics | Arabic

Online Training 05/20/2021 8:30 AM - 12:30 PM CEST

Online Training | English

RFEM | Structural dynamics and earthquake design according to EC 8

Online Training 06/02/2021 8:30 AM - 12:30 PM CEST

Online training | English

RFEM for Students | Part 3

Online Training 06/15/2021 2:00 PM - 4:30 PM CEST

Online Training | English

RFEM | Basics | USA

Online Training 06/17/2021 9:00 AM - 1:00 PM CDT

Plate and Shell Buckling Utilizing Dlubal Software

Plate and Shell Buckling Utilizing Dlubal Software

Webinar 03/30/2021 2:00 PM - 2:45 PM CEST

CSA S16:19 Steel Design in RFEM

CSA S16:19 Steel Design in RFEM

Webinar 03/10/2021 2:00 PM - 3:00 PM CDT

The Most Common User Errors With RFEM and RSTAB

The Most Common User Errors With RFEM and RSTAB

Webinar 02/04/2021 2:00 PM - 3:00 PM CET

ADM 2020 Member Design in RFEM

ADM 2020 Member Design in RFEM

Webinar 01/19/2021 2:00 PM - 3:00 PM CDT

Dlubal Info Day

Dlubal Info Day Online | December 15, 2020

Webinar 12/15/2020 9:00 AM - 4:00 PM CET

FEA Troubleshooting and Optimization in RFEM

FEA Troubleshooting and Optimization in RFEM

Webinar 11/11/2020 2:00 PM - 3:00 PM CDT

Soil-Structure Interaction in RFEM

Soil-Structure Interaction in RFEM

Webinar 10/27/2020 2:00 PM - 2:45 PM CET

NBC 2015 Modal Response Spectrum Analysis in RFEM

NBC 2015 Modal Response Spectrum Analysis in RFEM

Webinar 09/30/2020 2:00 PM - 3:00 PM CDT

Documenting Results in the RFEM Printout Report

Webinar 08/25/2020 2:00 PM - 2:45 PM CEST

ACI 318-19 Concrete Design in RFEM

ACI 318-19 Concrete Design in RFEM

Webinar 08/20/2020 2:00 PM - 3:00 PM CDT

RFEM Main Program
RFEM 5.xx

Main Program

Structural engineering software for finite element analysis (FEA) of planar and spatial structural systems consisting of plates, walls, shells, members (beams), solids and contact elements

Price of First License
3,540.00 USD
RSTAB Main Program
RSTAB 8.xx

Main Program

The structural engineering software for design of frame, beam and truss structures, performing linear and nonlinear calculations of internal forces, deformations, and support reactions

Price of First License
2,550.00 USD
RSTAB Dynamic Analysis
DYNAM Pro - Equivalent Loads 8.xx

Add-on Module

Seismic and static load analysis using the multi-modal response spectrum analysis

Price of First License
580.00 USD
RFEM Dynamic Analysis
RF-DYNAM Pro - Equivalent Loads 5.xx

Add-on Module

Seismic and static load analysis using the multi-modal response spectrum analysis

Price of First License
760.00 USD