In addition to our technical support (e.g. via chat), you’ll find resources on our website that may help you with your design using Dlubal Software.
Frequently Asked Questions (FAQ)
Customer Support 24/7
AnswerThe RF-TIMBER AWC module does not optimize cross-sections for the Serviceability Limit State or the Fire Resistance design. Optimization is only calculated for the Ultimate Limit State design.Users must manually adjust the cross-section in RFEM or within the add-on module and can export the cross-section back into RFEM. In either scenario, the model must be rerun in order to calculate the correct internal forces with the adjusted member size.
I have modified cross-section properties or reduced stiffnesses of a members in RFEM/RSTAB. After a new calculation, the deformation of the structural system has adjusted itself to the new cross-section properties. However, this change is not taken into account when performing design in add-on modules.
In principle, the modified cross-section properties are not transferred into add-on modules, such as RF‑/STEEL or RF‑/STEEL EC3. They are only used for the calculation of internal forces.
In the add-on modules, stresses are calculated using the real cross-section dimensions, which cannot be modified. This would be difficult to implement as many designs require the element width or height and due to the modification, it is not known which parameter has been reduced exactly. This is important for the c/t-designs in RF‑/STEEL EC3, for example.
Did you find your question?
If not, contact us via our free e-mail, chat, or forum support, or send us your question via the online form.
Wind Simulation & Wind Load Generation
With the stand-alone program RWIND Simulation, wind flows around simple or complex structures can be simulated by means of a digital wind tunnel.
The generated wind loads acting on these objects can be imported to RFEM or RSTAB.
“Thank you for the valuable information.
I would like to pay a compliment to your support team. I am always impressed how quickly and professionally the questions are answered. I have used a lot of software with a support contract in the field of structural analysis, but your support is by far the best. ”