- More than 45,000 users in 95 countries
- One software package for all application areas
- Free support provided by experienced engineers
- Short learning time and intuitive handling
- Excellent price/performance ratio
- Flexible modular concept, extensible according to your needs
- Scalable license system with single and network licenses
- Proven software used in many well-known projects
Why Dlubal Software?
Wind Simulation & Wind Load Generation
With the stand-alone program RWIND Simulation, wind flows around simple or complex structures can be simulated by means of a digital wind tunnel.
The generated wind loads acting on these objects can be imported to RFEM or RSTAB.
In the following, a hinged column with a centrally acting axial force and a line load acting on the strong axis will be designed by means of the RF-/STEEL EC3 add-on module according to EN 1993-1-1.
In this technical article, a hinged column with a centrally acting axial force and a linear load that acts on the major axis is designed according to EN 1993-1-1 with the aid of the RF-/STEEL EC3 add-on module. Column head and column base are assumed as a lateral and torsional restraint. The column is not held against rotation between the supports. The cross-section of the column is an HEB 360 from S235.
The following article describes designing a two-span beam subjected to bending by means of the RF-/STEEL EC3 add-on module according to EN 1993-1-1. The global stability failure will be excluded due to sufficient stabilizing measures.
The cross-section class of a two-span beam will be designed in the following. In addition, the necessary cross-section designs will be performed. The global stability failure will be excluded due to sufficient stabilizing measures.
The printout reports created in RFEM and RSTAB can be transferred to VCmaster via an interface and further processed there. VCmaster (formerly BauText) is a word processing program for engineers. Calculations, drawings, photos and documents from various sources can be easily compiled, managed and used again with VCmaster.
The 3D PDF functionality allows you to display three-dimensional models from RFEM or RSTAB in a 3D PDF.
In the case of a post-critical failure, a substantial change in the geometry of a structure occurs. After reaching the instability of the equilibrium, a stable, strong position is reached again. The post-critical analysis requires an experimental approach. It is necessary to manually load the structure in increments step by step.
The ‘Measure’ function available in the ‘Tools’ menu allows you to measure distances and angles.
The layout of a printout report can be adjusted by changing fonts, font colors, page margins, and table shading.
Do you have questions or need advice?
Contact our free e-mail, chat, or forum support or find various suggested solutions and useful tips on our FAQ page.
Customer Support 24/7