CRANEWAY | Results
All results are arranged in result windows sorted by different topics. The design values are illustrated in the corresponding cross-section graphic. Design details cover all intermediate values.
General Stress Analysis
CRANEWAY performs the general stress analysis of a crane girder by calculating the existing stresses and comparing them with the limit normal, shear and equivalent stresses. Welds are also subjected to the general stress analysis with regard to parallel and vertical shear stresses and their superposition.
Fatigue design is performed for up to three cranes operating at the same time, based on the nominal stress concept according to EN 1993-1-9. In the case of the fatigue design according to DIN 4132, a stress curve of crane passages is recorded for each stress point and evaluated according to the Rainflow method.
Buckling analysis considers the local introduction of wheel loads according to the standard EN 1993-6 or DIN 18800-3.
Deformation analysis is performed separately for the vertical and horizontal direction by comparing the designed displacements with the allowable values. You can individually specify the allowable deformation ratios in the calculation parameters.
Lateral-Torsional Buckling Analysis
The flexural-torsional buckling analysis is performed in accordance with the second-order analysis for torsional buckling considering imperfections. The general stress analysis has to be fulfilled with the critical load factor smaller than 1.00. As a result, CRANEWAY displays the corresponding critical load factor for all load combinations of the stress analysis.
The program determines all support forces on the basis of the characteristic loads including dynamic factors.
Do you have any questions or need advice?
Contact us via e-mail, chat or forum. Find also various suggested solutions and useful tips on our FAQ page.