RF-CONCRETE Surfaces Version 5

Online manuals, introductory examples, tutorials, and other documentation.

RF-CONCRETE Surfaces Version 5

Switch to Fullscreen Mode Exit Fullscreen Mode

7.1 Printout Report

The creation of printouts for the data of the RF-CONCRETE Surfaces add-on module is similar to the procedure in RFEM: The program generates a printout report for the RF-CONCRETE Surfaces results; graphics and descriptions can be added subsequently. The selection in the printout report determines which data from the design module will be included in the final printout.

The printout report is described in detail in the RFEM manual. Chapter Selecting Data of Add-on Modules explains how to prepare input and output data of add-on modules for the printout.

A special selection option is available for the intermediate results of serviceability limit state designs performed according to the analytical method. In the Points column, you can select all designable, all non-designable, or only the Governing points: These points provide the greatest reinforcement areas or ratios. Point numbers can also be User-Defined.

Figure 7.1 Dialog box Printout Report Selection, tab SLS - Analytical Method

For large structural systems with many design cases, it is recommended to split the data into several printout reports, thus allowing for a clearly arranged overview.