Knowledge Base


Why Dlubal Software?


  • More than 45,000 users in 95 countries
  • One software package for all application areas
  • Free support provided by experienced engineers
  • Short learning time and intuitive handling
  • Excellent price/performance ratio
  • Flexible modular concept, extensible according to your needs
  • Scalable license system with single and network licenses
  • Proven software used in many well-known projects


Receive information including news, useful tips, scheduled events, special offers, and vouchers on a regular basis.

  1. Dlubal Online Service

    Seismic Loads on Buildings in Germany

    DIN EN 1998-1 with the National Annex DIN EN 1998-1/NA specifies how to determine seismic loads. The standard applies to structural engineering in seismic areas.

  2. Figure 01 - Wind Zones of Germany

    Wind Load on Monopitch and Duopitch Roofs in Germany

    In Germany, DIN EN 1991-1-4 with the National Annex DIN EN 1991-1-4/NA regulates the wind loads. The standard applies to civil engineering works up to an altitude of 300 m.
  3. Figure 01 - Snow Load Zones of Germany

    Snow Load on Monopitch and Duopitch Roofs

    In Germany, DIN EN 1991-1-3 with the National Annex DIN EN 1991-1-3/NA regulates the snow loads. The standard applies to civil engineering works at an altitude of up to 1,500 m above sea level.
  4. Ideal Gas in Structural Analysis

    In theory, an ideal gas consists of freely moving mass particles without extension in a volume space. In this space, each particle moves at a speed in one direction. The collision of one particle with another particle or the volume limitations lead to a deflection and a change in the speed of the particles.

  5. Cutting Pattern of Membranes and Cable Elements

    Cable and tensile membrane structures are regarded as very slender and aesthetic building constructions. The partly very complex double-curved shapes can be found using suitable form-finding algorithms. A possible solution is, for example, to search the form via the equilibrium between the surface stress (provided prestress and an additional load such as self-weight, pressure, etc.) and the given boundary conditions.

  6. Spatial and Planar Load Display

    In RFEM, structures can be modelled and analysed in a spatial environment. The permanent 3D visualization helps to better understand complex models and to represent the force flux. However, it is also possible to switch from a spatial mode to a planar sheet mode in the documentation of a calculation. For this, you have to describe the spatial calculation of the structure with all the necessary properties on ‘flat’ paper pages for an independent reader. Usually, you try to display the load actions and the corresponding results by using an orthogonal view of the substructure of the entire structure. Obviously, the load symbols depicted in the 3D mode in a view perpendicular to the load become unrecognizable due the missing expansion. In order to still be able to create a clear representation of all information, the corresponding adjustments are available in RFEM.

  7. Coupled Failure Criteria

    If a bending load of a brittle beam element (an unreinforced concrete beam) is increased by means of the bending capacity, the structure responds by breaking the cross-section, and the member is separated into two segments. At the time of the failure, the broken part suddenly loses its potential to transfer the bending moment. Due to the segmentation, the critical part also fails to transfer the other force types, such as axial forces.

  8. Load Determination in RF-/STEEL Warping Torsion

    This article explains how to determine loads on the basis of the internal force situations defined in the RF-/STEEL Warping Torsion extension of the RF-/STEEL EC3 add-on module. Since this new program allows you to also analyze extracted chain-like beam structures in addition to entire chain-like beam structures, it is necessary to determine the loads of the partial structure separately. For this, a special transformation function has been developed, which determines new loads of all partial structures (depending on the internal forces calculated in RFEM/RSTAB) according to each load situation for geometrically nonlinear warping torsion analysis with seven degrees of freedom.

  9. Friction Hinges

    Some compound beam structures such as stacked containers or retracted telescopic bars transfer the forces in the connection between the components by friction. The load bearing capacity of such a connection depends on the effective axial force perpendicular to the friction plane and on the friction coefficients between both friction surfaces. For example, the more the friction surfaces are compressed, the more horizontal shear force can be transferred by the friction surfaces (static friction).

  10. CAD/BIM Model

    RFEM and RSTAB provide the option to “Enable CAD/BIM model” in the Model - General Data dialog box, tab “Options”. In addition to creating a model as usual, this CAD/BIM model allows you to import, organize and transform IFC, STEP, and IGES files.

1 - 10 of 50

Contact us

Contact to Dlubal

Do you have questions or need advice?
Contact our free e-mail, chat, or forum support or find various suggested solutions and useful tips on our FAQ page.

+49 9673 9203 0

Customer Support 24/7

Knowledge Base

In addition to our technical support (e.g. via chat), you’ll find resources on our website that may help you with your design using Dlubal Software.

First Steps

First steps

We provide hints and tips to help you get started with the main programs RFEM and RSTAB.

Powerful and Capable Software

“I think the software is so powerful and capable that people will really value its power when they get properly introduced to it.”