# Ejemplos de verificación

## Eccentric Transverse Force

VE 0210

3. mayo 2019

A console made of round bar is loaded by means of eccentric transverse force. Determine the maximal deflection and maximal twist of the console using geometrically linear analysis.

VE 0211

3. mayo 2019

A console made of round bar is loaded by means of eccentric uniform load. Determine the maximal deflection and maximal twist of the console using geometrically linear analysis.

## Eccentric Axial Force

VE 0209

3. mayo 2019

A console made of round bar is loaded by means of eccentric axial force. Determine the maximal vertical deflection of the console using geometrically linear and second-order analysis.

## Spring with Clearance

VE 0119

3. mayo 2019

A single-mass system with clearance and two springs is initially deflected. Determine the natural oscillations of the system - deflection, velocity and acceleration time course.

## Lateral Buckling of a Beam in Pure Bending

VE 0095

30. abril 2019

A simply supported beam is loaded by means of pure bending. Determine the critical load and corresponding load factor due to lateral buckling.

## Plastic Material Oscillations

VE 0124

14. noviembre 2018

This verification example is based on Verification Example 0122. A single-mass system without damping is subjected to an axial loading force. An ideal elastic-plastic material with characteristics is assumed. Determine the time course of the end-point deflection, velocity and acceleration.

## Euler Buckling

VE 0096

14. noviembre 2018

A strut with circular cross-section is supported according to four basic cases of Euler buckling and it is subjected to pressure force. Determine the critical load.

## Eight-Member Symmetric Shallow Truss Snap-Through

VE 0201

8. octubre 2018

A symmetrical shallow structure is made of eight equal truss members, which are embedded into hinge supports. The structure is loaded by the concentrated force and alternatively by the imposed nodal deformation over the critical limit point when the snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection considering large deformation analysis. Evaluate the load factor at given deflections.

## Cable Equilibrium Force

VE 0205

8. octubre 2018

A cable is loaded by means of the uniform load. This causes the deformed shape in the form of the circular segment. Determine the equilibrium force of the cable to obtain the given sag of the cable. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in analytical solution, also self-weight is neglected in this example.

## Four-Member Truss Snap-Through

VE 0200

5. octubre 2018

A structure is made of four truss members, which are embedded into hinge supports. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point, when snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection considering large deformation analysis. Evaluate the load factor at given deflections.

1 - 10 de 77

#### Buscar ejemplo

Programa / Módulo

Modelo de material

Método de cálculo

Tipo de modelo

Funciones especiales

#### Boletín de noticias

Reciba información de manera regular sobre noticias, consejos útiles, eventos programados, ofertas especiales y cupones.