# Ejemplos de verificación

## Eccentric Transverse Force

VE 0210

3. mayo 2019

A console made of round bar is loaded by means of eccentric transverse force. Determine the maximal deflection and maximal twist of the console using geometrically linear analysis.

VE 0211

3. mayo 2019

A console made of round bar is loaded by means of eccentric uniform load. Determine the maximal deflection and maximal twist of the console using geometrically linear analysis.

## Spring with Clearance

VE 0119

3. mayo 2019

A single-mass system with clearance and two springs is initially deflected. Determine the natural oscillations of the system - deflection, velocity and acceleration time course.

## Eccentric Axial Force

VE 0209

3. mayo 2019

A console made of round bar is loaded by means of eccentric axial force. Determine the maximal vertical deflection of the console using geometrically linear and second-order analysis.

## Lateral Buckling of a Beam in Pure Bending

VE 0095

30. abril 2019

A simply supported beam is loaded by means of pure bending. Determine the critical load and corresponding load factor due to lateral buckling.

## Helicoid

VE 0208

10. febrero 2019

A membrane is stretched by means of isotropic prestress between two radii of two concentric cylinders not lying in a plane parallel to the vertical axis. Find the final minimal shape of the membrane - the so-called helicoid, and determine the surface area of the resulting membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in analytical solution, also self-weight is neglected in this example.

## Plastic Material Oscillations

VE 0124

14. noviembre 2018

This verification example is based on Verification Example 0122. A single-mass system without damping is subjected to an axial loading force. An ideal elastic-plastic material with characteristics is assumed. Determine the time course of the end-point deflection, velocity and acceleration.

## Catenoid

VE 0207

14. noviembre 2018

A cylindrical membrane is stretched by means of isotropic prestress. Find the final minimal shape of the membrane - catenoid. Determine the maximum radial deflection of the membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in analytical solution, also self-weight is neglected in this example.

## Euler Buckling

VE 0096

14. noviembre 2018

A strut with circular cross-section is supported according to four basic cases of Euler buckling and it is subjected to pressure force. Determine the critical load.

## Beam in Axial Compression According to ADM

VE 1007

5. noviembre 2018

Determine the allowable axial compressive strength of a pinned 8 ft long beam of various cross-sections made of Alloy 6061-T6 and laterally restrained to prevent buckling about its weak axis in accord with the Aluminium Design Manual.

1 - 10 de 127

#### Buscar ejemplo

Programa / Módulo

Modelo de material

Método de cálculo

Tipo de modelo

Funciones especiales

#### Boletín de noticias

Reciba información de manera regular sobre noticias, consejos útiles, eventos programados, ofertas especiales y cupones.