FAQ 001089 FR

Display settings RF-END-PLATE

Why is the message "Web weld as outside of recommended DIN limits" displayed, although no specifications have been selected?


This message appears if the guidelines are not met for the dimensioned end plate.

Primarily, the recommendations for the layout of welds are supposed to be a design aid, so they are no binding requirement.

Welds can be carried out even bigger if adequate methods are applied.

But if you want to keep the limits, go to the input window 1.2 and select the option for entering the end plate thickness dp. If you enter the dimensioned thickness there, you can see the limits according to DIN in the results table for the weld design.

Now, if you select a value for the web weld that lies within these limits and you restart the calculation, no error log will occur.



Avez-vous trouvé des réponses à vos questions?

Si non, contactez-nous ou envoyez-nous votre question via le formulaire.

+33 1 78 42 91 61


Premiers Pas

Premiers pas

Ici vous trouverez quelques trucs et astuces pour faciliter votre prise en main des logiciels de calcul de structure RFEM et RSTAB.