 # Esempi di verifica

## Eccentric Transverse Force

VE 0210

3. maggio 2019

A console made of round bar is loaded by means of eccentric transverse force. Determine the maximal deflection and maximal twist of the console using geometrically linear analysis.

## Eccentric Uniform Load

VE 0211

3. maggio 2019

A console made of round bar is loaded by means of eccentric uniform load. Determine the maximal deflection and maximal twist of the console using geometrically linear analysis.

## Eccentric Axial Force

VE 0209

3. maggio 2019

A console made of round bar is loaded by means of eccentric axial force. Determine the maximal vertical deflection of the console using geometrically linear and second-order analysis.

## Lateral Buckling of a Beam in Pure Bending

VE 0095

30. aprile 2019

A simply supported beam is loaded by means of pure bending. Determine the critical load and corresponding load factor due to lateral buckling.

## Euler Buckling

VE 0096

14. novembre 2018

A strut with circular cross-section is supported according to four basic cases of Euler buckling and it is subjected to pressure force. Determine the critical load.

## Thin Rectangular Orthotropic Plate Under Uniform Load

VE 0091

10. luglio 2018

Thin rectangular orthotropic plate is simply supported and loaded by the uniformly distributed pressure. The directions of axis x and y coincide with the principal directions. While neglecting self-weight, determine the maximum deflection of the plate.

## Dynamic Force Distribution

VE 0121

10. luglio 2018

A single-mass system with dashpot is subjected to a constant loading force. Determine the spring force, the damping force and the inertial force at given test time. In this verification example, the Kelvin--Voigt dashpot, namely, a spring and a damper element in serial connection, is decomposed into its purely viscous and purely elastic parts, in order to better evaluate the reaction forces.

## Buckling of Beam with Various Cross-Sections

VE 0093

10. luglio 2018

A column is composed of a concrete part - rectangle 100/200 and of a steel part - profile I 200. It is subjected to pressure force. Determine the critical load and corresponding load factor. The theoretical solution is based on the buckling of a simple beam. In this case two regions have to be taken into account due to different moment of inertia and material properties.

## Single-Mass Oscillation with Dashpot

VE 0120

21. febbraio 2018

A single mass system with dashpot is subjected to the constant loading force. Determine the deflection and the velocity of the dashpot endpoint in given test time.

VE 0087

20. febbraio 2018

A curved beam consists of two beams with a rectangular cross-section. The horizontal beam is loaded by a distributed loading. While neglecting self-weight, determine the maximal stress on the top surface of the horizontal beam.

1 - 10 di 85

#### Cerca esempio

Programma / Modulo aggiuntivo

Modello del materiale

Metodo di calcolo

Modello entità

Caratteristiche particolari 