Esempi di verifica

W-Shape Column Design with Pinned Ends According to AISC E.1A

VE 1003 22. settembre 2018 RFEM RF-STEEL AISC Verifiche di progetto

An ASTM A992 14×132 W-shape column is loaded with the axial compression forces given. The column is pinned top and bottom in both axes. Determine whether the column is adequate to support the loading shown in Figure 1 based on LRFD and ASD.

W-Shape Tension Member According to AISC D.1

VE 1002 22. settembre 2018 RFEM RF-STEEL AISC Verifiche di progetto

An ASTM A992 W-shape member is selected to carry a dead load of 30.000 kips and a live load of 90.000 kips in tension. Verify the member strength by both LRFD and ASD.

W-Shape Flexural Member Design According to AISC F.1-1A

VE 1004 22. settembre 2018 RFEM RF-STEEL AISC Verifiche di progetto

Consider an ASTM A992 W 18×50 beam forspan and uniform dead and live loads as shown in Figure 1. The member is limited to a maximum nominal depth of 18 in. The live load deflection is limited to L/360. The beam is simply supported and continuously braced. Verify the available flexural strength of the beam selected based on LRFD and ASD.

W-Shape in Strong Axis Shear According to AISC G.1A

VE 1005 22. settembre 2018 RFEM RF-STEEL AISC Verifiche di progetto

An ASTM A992 W 24×62 beam with end shears of 48.000 and 145.000 kips from dead and live load is shown in Figure 1. Verify the available shear strength of the beam selected based on LRFD and ASD.

Combined Compression and Bending Moment According to AISC H.1B

VE 1006 22. settembre 2018 RFEM RF-STEEL AISC Verifiche di progetto

Using AISC Manual tables, determine the available compressive and flexural strengths and if the ASTM A992 W14x99 beam has sufficient available strength to support the axial forces and moments shown in Figure 1, obtained from a second-order analysis that includes P-𝛿 effects.

Moment Frame Design According To AISC C.1A

VE 1001 22. settembre 2018 RFEM RF-STEEL AISC Verifiche di progetto

Determine the required strengths and effective length factors for the ASTM A992 material columns in the moment frame shown in Figure 1 for the maximum gravity load combination, using LRFD and ASD.

Cerca esempio


Programma / Modulo aggiuntivo


Modello del materiale


Metodo di calcolo


Modello entità


Caratteristiche particolari

Newsletter

Ricevi regolarmente informazioni riguardo notizie, consigli utili, eventi, offerte speciali e buoni.

Knowledge Base

Nella pagina 'Knowledge Base', puoi trovare molti articoli tecnici, suggerimenti e trucchi che possono aiutarti a risolvere le problematiche di progettazione strutturale che potresti incontrare usando i programmi Dlubal Software