Контрольные примеры

Beam in Axial Compression According to ADM

VE 1007

5. ноября 2018

Determine the allowable axial compressive strength of a pinned 8 ft long beam of various cross-sections made of Alloy 6061-T6 and laterally restrained to prevent buckling about its weak axis in accord with the Aluminium Design Manual.

Beam in Flexure According to ADM

VE 1008

5. ноября 2018

Verify that a beam of different cross-sections made of Alloy 6061-T6 is adequate for the required load, in accord with the Aluminium Design Manual.

W-Shape Tension Member According to AISC D.1

VE 1002

22. сентября 2018

An ASTM A992 W-shape member is selected to carry a dead load of 30.000 kips and a live load of 90.000 kips in tension. Verify the member strength by both LRFD and ASD.

W-Shape Column Design with Pinned Ends According to AISC E.1A

VE 1003

22. сентября 2018

An ASTM A992 14×132 W-shape column is loaded with the axial compression forces given. The column is pinned top and bottom in both axes. Determine whether the column is adequate to support the loading shown in Figure 1 based on LRFD and ASD.

W-Shape Flexural Member Design According to AISC F.1-1A

VE 1004

22. сентября 2018

Consider an ASTM A992 W 18×50 beam forspan and uniform dead and live loads as shown in Figure 1. The member is limited to a maximum nominal depth of 18 in. The live load deflection is limited to L/360. The beam is simply supported and continuously braced. Verify the available flexural strength of the beam selected based on LRFD and ASD.

Moment Frame Design According To AISC C.1A

VE 1001

22. сентября 2018

Determine the required strengths and effective length factors for the ASTM A992 material columns in the moment frame shown in Figure 1 for the maximum gravity load combination, using LRFD and ASD.

W-Shape in Strong Axis Shear According to AISC G.1A

VE 1005

22. сентября 2018

An ASTM A992 W 24×62 beam with end shears of 48.000 and 145.000 kips from dead and live load is shown in Figure 1. Verify the available shear strength of the beam selected based on LRFD and ASD.

Combined Compression and Bending Moment According to AISC H.1B

VE 1006

22. сентября 2018

Using AISC Manual tables, determine the available compressive and flexural strengths and if the ASTM A992 W14x99 beam has sufficient available strength to support the axial forces and moments shown in Figure 1, obtained from a second-order analysis that includes P-𝛿 effects.

Поиск примера

Программа/ доп. модуль

Материал модели

Метод расчета

Объект моделирования

Особая характеристика

Новостная рассылка

Получайте информацию, включая новости, полезные советы, запланированные мероприятия, специальные предложения и ваучеры на регулярной основе.

Круглосуточная поддержка

В дополнение к нашей технической поддержке (например, через чат) на нашем веб-сайте вы найдете ресурсы, которые могут помочь вам при разработке вашего проекта с использованием программного обеспечения Dlubal.