移动别墅 'Vechthoeve',荷兰

客户项目

2014年07月24日

荷兰 RFEM 钢筋混凝土结构

结构设计 Techniek en Methode B.V.
's-Gravendeel, Netherlands
www.tenm.nu
建造 Contractor
Bresser Grote Projecten
's-Gravendeel, Netherlands
www.bresser.nu
投资商 Rijkswaterstaat
Ministry of Infrastructure and the Environment
Netherlands
www.rijkswaterstaat.nl

The following data refer to the model of the floor slab.

Length: ~ 22 m | Width: ~ 13 m | Height: ~ 1 m | Weight: ~ 125 t
Number of Surfaces: 3 | Finite Elements: 7,522

At the end of 2013, the ‘Vechthoeve’ was transported over a distance of 500 m. The wooden house, referred to as the Pippi Longstocking house, is situated close to Amsterdam, the capital of the Netherlands. The villa had to be relocated because of plans to widen the A1 highway.

In nearly three months, Bresser from ‘s-Gravendeel, Netherlands, completed the project of moving the house over both land and water to its final destination at the Hoogerlust estate.

UNESCO Heritage

The ‘Vechthoeve’ is a part of the ‘Defence Line of Amsterdam’ (UNESCO heritage). Due to its great cultural and historical value, it was decided by the Dutch Ministry of Public Works that the monument would be relocated to a new location and be given a new function.

Consequently, transporting the house over water was the only option, in which two dikes had to be passed. The relatively weak dikes were crossed by two temporary bridges and a set of sheet piles. In order to adequately support the building during the transportation phase, a completely new foundation was made.

Additionally, seventeen steel foundation piles were installed inside the building. The same amount of jacks were used to lift the complete structure 2.7 m off the ground. Finally, a set of so-called SPMTs (Self Propelled Modular Transporters) were moved underneath the 300 mm thick concrete foundation slab.

Concrete Foundation Slab Design

In RFEM 5, a set of three models were made:

  1. Permanent situation
  2. Transportation
  3. Jacking up

The model consists of several concrete surfaces loaded by line loads (the jacks) and dead load. The jacks were modeled as flexible supports with different stiffnesses in each direction. The required reinforcement in the slab was designed with the use of the module RF‑CONCRETE Surfaces.

结构设计使用的软件

联系我们

联系 Dlubal

如果您有任何关于我们产品的问题或者建议,请联系我们的技术支持或者搜索我们的问题和解答 (FAQs)。

+49 9673 9203 0

(可要求接中文热线)

info@dlubal.com

新闻简报

订阅相关新闻简讯,并获取有关实用的建议、计划举办的活动以及独家促销和优惠卷的信息。