苏黎世机场飞机隔音飞机库,瑞士

客户项目

结构设计 Structural Analysis and Design
WTM Engineers GmbH
Hamburg, Germany
www.wtm-engineers.de

Planning Team
Suisseplan AG, Zurich, Switzerland
GAC German Airport Consulting GmbH, Hamburg, Germany
LSB Gesellschaft für Lärmschutz mbH, Hamburg, Germany
投资商 Zurich Airport AG, Switzerland

长:~ 91 m | 宽:~ 88 m | 高:~ 26 m
节点数目:948 | 杆件:2360 | 截面:112

该机库项目的作用是主要为了飞机的定期检查、维护以及检修工作,并且满足最终发动机试车流程的各项环境和技术要求。为了考虑对附近居民的噪音污染,瑞士苏黎世机场(FZAG)建造了该防噪音机库,该修理机库严格按照控制噪音污染的各项技术指标要求进行设计和建造。

Dlubal 公司客户 WTM Engineers 和苏黎世 Suisseplan、德国 GAC German Airport Consulting、德国 LSB Gesellschaft für Lärmschutz 一起负责该项目,并在 2014 年 6 月圆满结束。

WTM Engineers 使用软件 RSTAB 计算分析该机库的空间支撑结构,并使用 STEEL SIA 按照瑞士钢结构标准 SIA 263 进行设计。

主要支撑结构

The roof structure with an area of 5,200 m2 is supported by an external steel structure consisting of both spatial and flat trusses as well as support elements across the maximum span of 78.5 m. The hangar can accommodate aircraft up to the size of Boeing 747‑8 with a wing span of 68.5 m.

The main supporting elements are two truss frames with ridge releases which span the whole hangar and support it in the transverse direction. The frames are restrained to foundation blocks on the support nodes.

A truss girder spans the rear opening which is integrated into the gable wall.

In the longitudinal direction, trusses are placed in the apex zone at the side walls of the enclosure which are attached to the main truss frames. They cantilever about 34 m to the top of the hangar.

External spatial three-chord truss girders are linked to the main supporting structure to hold the trapezoidal cross‑sections of the roof.

With the noise protection hangar at the Zurich Airport, a building with appealing architecture has been created.

使用的结构设计与分析软件

联系我们

联系 Dlubal

如果您有任何关于我们产品的问题或者建议,请联系我们的技术支持或者搜索我们的问题和解答 (FAQs)。

+49 9673 9203 0

(可要求接中文热线)

info@dlubal.com