The science park completes the Johannes Kepler University Linz in Austria with five further buildings.
Do you have any questions?
Length: 00:00:45 min
Knowledge Base
Length: 00:01:09 min
Knowledge Base
Length: 00:00:55 min
Knowledge Base
Length: 00:00:27 min
Length: 00:01:33 min
Length: 00:00:55 min
Length: 00:00:50 min
.png?mw=350&hash=5c4b2144aa52cd2928e41d7b311671dea882afa3)
For the design of concrete surfaces, the rib component of the internal forces can be neglected for the ULS calculation and for the analytical method of the SLS calculation, because this component is already considered in the member design. To do this, select the check box in the "Details" dialog box. If no rib was defined, this function is not available.
RF-CONCRETE Members for RFEM or CONCRETE for RSTAB propose an automatically created reinforcement to the user if the "Design the provided reinforcement" option is selected in Window 1.6 "Reinforcement".
Shrinkage and creep are time-dependent deformation properties of concrete that usually have to be considered in the serviceability limit state design.
RF‑CONCRETE Surfaces for RFEM 5 allows you to use averaged internal forces for design of concrete surfaces.
The results of solid stresses can be displayed as colored 3D points in the finite elements.
.png?mw=512&hash=ea9bf0ab53a4fb0da5c4ed81d32d53360ab2820c)
The number of degrees of freedom in a node is no longer a global calculation parameter in RFEM (6 degrees of freedom for each mesh node in 3D models, 7 degrees of freedom for the warping torsion analysis). Thus, each node is generally considered with a different number of degrees of freedom, which leads to a variable number of equations in the calculation.
This modification speeds up the calculation, especially for models where a significant reduction of the system could be achieved (for example, trusses and membrane structures).
Display extended strains of members, surfaces, and solids (for example, the important principal strains, equivalent total strains, and so on) in the Project Navigator - Results in RFEM as well as in Table 4.0.
For example, you can display governing plastic strains when performing the plastic design of connections with surface elements.
RFEM and RSTAB models can be saved as 3D glTF models (*.glb and *.glTF formats). View the models in 3D in detail with a 3D viewer from Google or Babylon. Take your VR glasses, such as Oculus, to "walk" through the structure.
You can integrate the 3D glTF models into your own websites using JavaScript according to these instructions (as on the Dlubal website Models to Download).
What is the maximum number of reinforcement groups that can be created in a design case in RF‑CONCRETE Surfaces?
How can I quickly transfer a modified value to the other rows in the input table of an add-on module?
Can I design a reinforced concrete structure according to ÖNORM in RFEM?
How can I design a ribbed plate in state II with RF‑CONCRETE NL and use the stiffness export from the add-on modules for this?
Can I define a beam with a specific reinforcement in RFEM 5 and then obtain a design of that reinforcement including the design ratio?
Is it possible to enter and design a reinforced concrete surface with a reinforcement layer in the center of the surface?
.jpg?mw=350&hash=8f312d6c75a747d88bf9d0f5b1038595900b96c1)