12 结果
查看结果:
排序方式:
本文将该设计与所引用文章中的设计进行比较: 使用 RF-CONCRETE Members 设计混凝土轴心受压柱。 因此,它是关于将在 RF-CONCRETE Members 中完成的相同理论应用复制到 RF-CONCRETE Columns 中。 目的是比较两个附加模块在柱状混凝土杆件设计中的不同输入参数和得到的结果。
在 RF‑/CONCRETE Columns 中提供了不同的方法来定义最小纵向配筋。 最小配筋可以根据用户使用和/或指定的设计标准进行选择。
Le présent article traite des éléments dont la section est soumise simultanément à un moment fléchissant, à un effort tranchant et à un effort normal de compression ou de traction. Cependant, dans notre exemple nous n'intégrerons pas de sollicitations dues à un effort tranchant.
Using the RF-TIMBER CSA module, timber column design is possible according to the CSA O86-19 standard. Accurately calculating timber member compressive resistance and adjustment factors is important for safety considerations and design. The following article will verify the factored compressive resistance in the RFEM add-on module RF-TIMBER CSA, using step-by-step analytical equations as per the CSA O86-19 standard including the column modification factors, factored compressive resistance, and final design ratio.
Reinforced concrete surface design for slabs, plates, and walls is possible in the RF-CONCRETE Surfaces module according to the ACI 318-19 or the CSA A23.3-19 standard. A common approach for slab design is the use of design strips for determining the average one-way internal forces over the width of the strip. This design strip method essentially takes a two-way slab element and applies a simpler one-way approach to determine the required reinforcement needed along the strip length.
在 RF-CONCRETE Columns 中根据名义曲率的方法计算用于屈曲分析的内力时,必须要先确定必要的偏心。
说到 ASCE 7 中建筑结构上的风荷载,可以找到大量的资源来补充设计规范和帮助工程师处理这种侧向荷载。 However, engineers may find it more difficult to find similar resources for wind loading on non-building type structures. This article will examine the steps to calculate and apply wind loads as per ASCE 7-16 on a circular reinforced concrete tank with a dome roof.
在 RF-CONCRETE Columns 中自动计算柱子的屈曲长度。 本文接下来将介绍在模块中的必要输入以及有效长度的计算流程。
结构不仅可以计算和计算内力和变形, Es ist auch sicherzustellen, dass die Kräfte und Momente im Tragwerk zuverlässig weitergeleitet und in das Fundament übergeben werden. Die Dlubal-Produktpalette bietet eine Reihe von Modulen, mit denen sich Stahl- und Holzverbindungen nachweisen lassen. So besteht in RF-/JOINTS Stahl - Stützenfuß die Möglichkeit, Fußpunkte von gelenkigen oder eingespannten Stahlstützen zu untersuchen. Die Stützenfußplatten können dabei mit oder ohne Steifen ausgeführt werden.
In the AISC 360 – 14th Ed. C2.2, the direct analysis method requires initial imperfections to be taken into consideration. The important imperfection of recognition is column out-of-plumbness. According to C2.2a, the direct modeling of imperfections is one method to account for the effect of initial imperfections. However, in many situations, the expected displacements may not be known or easily predicted.
在 RF-CONCRETE Members 和 CONCRETE 中使用的关于配筋图形的新选项现在也可以在 RF-/CONCRETE Columns 中使用。
在RF-/CONCRETE、RF-/CONCRETE Columns和RF-/FOUNDATION Pro中可以导出每个国家按照欧洲规范 EN 1992-1-1的参数。 Dabei stehen die Schnittstellen zu MS Excel und CSV zur Verfügung. Durch den Export der nationalen Parameter können diese zum Beispiel in MS Excel aufbereitet und eventuelle Unterschiede zwischen einzelnen nationalen Anhängen übersichtlich dargestellt werden (siehe Bild).