Determine analiticamente o momento de inércia de torção para a secção do tubo (superfície em anel) e compare os resultados para diferentes espessuras de parede com a solução numérica no RFEM 5 e no RSTAB 8.
Sobre uma fundação elástica Winkler, encontra-se uma viga em consola com uma secção retangular que está sujeita a uma carga distribuída. The image shows the calculation of the maximum deflection and maximum bending moment.
A viga de aço de secção quadrada está sujeita a uma força normal e a uma carga distribuída. The image shows the calculation of the maximum bending deflection and critical load factor according to the second-order analysis.
A viga de aço carregada axialmente com uma secção quadrada está apoiada sobre uma articulação numa das extremidades e sobre uma mola na outra extremidade. Two cases with different spring stiffnesses are considered. The verification example solves the calculation of the load factors of the beam in the image using the linear stability analysis.
A placa ortotrópica quadrada em camadas está completamente fixada no seu ponto central e sujeita a compressão. Compare the deflections of the plate corners to check the correctness of the transformation.
Uma viga em consola com fibras que não correm na direção do eixo da viga de uma secção quadrada sob pressão de tração. Calculate the maximum deflection.
Nas duas extremidades, está fixado um bloco tridimensional de material elástico-plástico. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai-Wu plasticity theory.
Determine the maximum deflection of a three-dimensional block fixed at both ends. The block is divided in the middle: the upper half is made of an elastic material and the lower part is made of timber - an elasto-plastic othotropic material with the yield surface described according to the Tsai-Wu plasticity theory. O plano central do bloco está sob pressão vertical.
Determine a flecha máxima de quatro pilares fixados na parte inferior, os quais estão ligados por um bloco rígido na parte superior. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled as orthotropic elastic material, and the inner columns as orthotropic elastic-plastic material with the same elastic parameters as the outer columns and plasticity properties defined according to the Tsai-Wu plasticity theory.
A timber beam reinforced by two steel plates at the ends is loaded by pressure. The wood fibers are parallel to the upper loaded side of the beam. A superfície plástica é descrita de acordo com a teoria da plasticidade de Tsai-Wu.