Uma membrana esférica de balão é preenchida com gás com pressão atmosférica e volume definido (estes valores são utilizados apenas para a definição do modelo de EF). Determine the overpressure inside the balloon due to the given isotropic membrane prestress. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Uma viga curvada é constituída por duas vigas de secção retangular. The horizontal beam is loaded by distributed loading. While neglecting self-weight, determine the maximum stress on the top surface of the horizontal beam.
Um recipiente esférico de parede fina é sujeito a compressão interna. While neglecting self‑weight, determine the von Mises stress and the radial deflection of the vessel.
Uma consola com secção circular é carregada por forças de flexão e rotação concentradas. The aim of this verification example is to compare the reduced stress according to the von Mises and Tresca theories.
A two-layered, open-ended, thick-walled vessel is loaded by inner and outer pressure; therefore, there is no axial stress. É determinada a flecha radial do raio interior e exterior, bem como a compressão (tensão radial), não sendo considerado o peso próprio.
A compact disc (CD) rotates at a speed of 10,000 rpm. Está, por isso, sujeito a uma força centrífuga. The problem is modeled as a quarter model. Determine the tangential stress on the inner and outer diameters and the radial deflection of the outer radius.
Quatro pilares estão fixados na parte inferior e ligados por um bloco rígido na parte superior. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.
Uma placa larga com uma abertura é carregada numa direção através de tensão de tração. The plate width is large with respect to the hole radius, and it is very thin, considering the state of the plane stress.