A viga em consola de parede fina feita de um perfil QRO está completamente fixada na extremidade esquerda e o empenamento é possibilitado. The cantilever is subjected to torque. Small deformations are considered, and the self-weight is neglected. Determine the maximum rotation, primary moment, secondary moment, and warping moment. The verification example is based on the example introduced by Gensichen and Lumpe.
A member with the given boundary conditions is loaded by torsional moment and axial force. Neglecting its self-weight, determine the beam's maximum torsional deformation as well as its inner torsional moment, defined as the sum of a primary torsional moment and torsional moment caused by the normal force. Compare estes valores ao mesmo tempo que aceita ou não considera a influência da força axial. The verification example is based on the example introduced by Gensichen and Lumpe.
A viga está completamente fixada na extremidade esquerda (empenamento restringido) e apoiada na extremidade direita por um apoio de forquilha (empenamento possibilitado). The beam is subjected to a torque, longitudinal force, and transverse force. Determine the behavior of the primary torsional moment, secondary torsional moment, and warping moment. The verification example is based on the example introduced by Gensichen and Lumpe.
A viga em consola com um perfil em I está apoiada na extremidade esquerda e é carregada com um binário. The aim of this example is to compare the fixed support with the fork support and to investigate the behavior of some representative quantities. Comparison is also made to the solution by means of plates. Small deformations are considered, and the self-weight is neglected. Determine the rotation in the midpoint of the cantilever, and in case of the member entity with warping, determine the values of the primary torsional moment, the secondary torsional moment, and the warping moment both on the left end (point A) and the right end (point B).