В дополнительном модуле RF-TIMBER CSA можно выполнять расчет деревянных колонн по норме CSA O86-19. С точки зрения безопасности и проектирования конструкций всегда очень важен точный расчет прочности на сжатие и поправочных коэффициентов для деревянных стержней. The following article will verify the factored compressive resistance in the RFEM add-on module RF-TIMBER CSA, using step-by-step analytical equations as per the CSA O86-19 standard including the column modification factors, factored compressive resistance, and final design ratio.
С помощью дополнительного модуля RF-TIMBER CSA вы можете выполнить расчет деревянных балок по норме CSA O86-14. С точки зрения проектирования и безопасности важно точно рассчитать прочность при изгибе и поправочные коэффициенты деревянных балок. The following article will verify the factored bending moment resistance in the RFEM add-on module RF-TIMBER CSA using step-by-step analytical equations as per the CSA O86-14 standard including the bending modification factors, factored bending moment resistance, and final design ratio.
Requirements for the design of structural stability are given in the AISC 360 – 14th Ed. Chapter C. In particular, the direct analysis method provisions, previously located in Appendix 7 of the AISC 360 – 13th Ed., are described in detail. This method is considered an alternative to the effective length method, which in turn eliminates the need for effective length (K) factors other than 1.0.