Балка в форме четверти окружности с прямоугольным сечением загружена силой, находящейся вне плоскости. This force causes a bending moment, torsional moment, and transverse force. While neglecting self-weight, determine the total deflection of the curved beam.
A sphere is subjected to a uniform flow of viscous fluid. The velocity of the fluid is considered at infinity. The goal is to determine the drag force. The parameters of the problem are set so that the Reynolds number is small and the radius of the sphere is also small, thus the theoretical solution can be reached - Stokes flow (G. G. Stokes 1851).
Колонна состоит из бетонного сечения (прямоугольник 100/200) и стального сечения (профиль I 200). It is subjected to pressure force. Determine the critical load and corresponding load factor. The theoretical solution is based on the buckling of a simple beam. In this case, two regions have to be taken into account due to different moments of inertia and material properties.
Балка, шарнирно опертая на обоих концах, загружена сосредоточенной силой в середине. Neglecting its self-weight and shear stiffness, determine the beam's maximum deflection, normal force, and moment at the mid-span, assuming the second- and third-order analysis.
Простой осциллятор состоит из массы m (рассчитываемой только в направлении x) и линейной пружины с жесткостью k. The mass is embedded on a surface with Coulomb friction and is loaded by constant-in-time axial and transverse forces.
Целью данного контрольного примера является расчёт обтекания планера. Задача состоит в том, чтобы определить коэффициент лобового сопротивления и коэффициент подъёмной силы по отношению к углу атаки. Эти коэффициенты также можно изобразить на графике поляры сопротивления. Предельный угол ламинарного обтекания профиля крыла можно также можно определить по полю скоростей. Доступная 3D-модель CAD (файл STL) используется в RWIND 2.
В контрольном примере сравнивается расчет ветровой нагрузки на здание с плоской кровлей по норме EN 1991-1-4 и с помощью моделирования CFD в программе RWIND Simulation. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
В контрольном примере сравнивается расчет ветровой нагрузки на здание с двускатной крышей по норме EN 1991-1-4 и с помощью CFD моделирования в программе RWIND Simulation. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
В данном контрольном примере сравниваются расчеты ветровой нагрузки на здание с двускатной кровлей по норме ASCE 7-16 и с помощью CFD моделирования в программе RWIND Simulation. The building is defined according to the sketch and the inflow velocity profile taken from the ASCE 7-16 standard.
Японский архитектурный институт (AIJ) представил ряд хорошо известных эталонных сценариев моделирования ветра. В основе данной статьи лежит «Случай E - комплекс зданий в реальной городской зоне с плотной концентрацией малоэтажных зданий в городе Ниигата». Далее описанный сценарий моделируется в программе RWIND2, а результаты сравниваются с результатами моделирования и эксперимента с помощью AIJ.
Конструкция фермы состоит из трех стержней (один стальной и два медных), соединенных жестким стержнем. The structure is loaded by a concentrated force and a temperature difference. While neglecting self‑weight, determine the total deflection of the structure.
Японский архитектурный институт (AIJ) представил ряд хорошо известных эталонных сценариев моделирования ветра. Следующая статья посвящена «случаю D - высотное здание среди городских кварталов». Далее описанный сценарий моделируется в программе RWIND2, а результаты сравниваются с результатами моделирования и эксперимента с помощью AIJ.
Данный пример служит для демонстрации ограничения диафрагмы. The application is shown on a two-story structure. The structure is loaded by means of lateral forces according to Figure 1. Determine the maximum deflection of the structure ux in the direction of the loading forces using both the diaphragm constraint and the plate model of the floor.
В данном контрольном примере сравниваются расчеты ветровой нагрузки на здание с плоской кровлей по норме ASCE 7-16 и с помощью CFD моделирования в программе RWIND Simulation. The building is defined according to the sketch and the inflow velocity profile taken from the ASCE 7-16 standard.
Стальной стержень между двумя жесткими опорами с зазором нагружен перепадом температур. While neglecting self‑weight, determine the total deformation of the rod and its internal axial force.
Балка полностью закреплена (депланация ограничена) на левом конце и поддерживается вилочной опорой (депланация включена) на правом конце. The beam is subjected to a torque, longitudinal force, and transverse force. Determine the behavior of the primary torsional moment, secondary torsional moment, and warping moment. The verification example is based on the example introduced by Gensichen and Lumpe.
A structure is made of two trusses, which are embedded into the hinge supports. The structure is loaded by concentrated force. Собственный вес не учитывается. Determine the relationship between the loading force and the deflection, considering large deformations.
Конструкция из двутаврового профиля полностью закреплена на левом конце и встроена в подвижную опору на правом конце. The structure consists of two segments. The self-weight is neglected in this example. Determine the maximum deflection of the structure, the bending moment on the fixed end, the rotation of segment 2, and the reaction force at point B by means of the geometrically linear analysis and the second-order analysis. The verification example is based on the example introduced by Gensichen and Lumpe.
Расчет изменений во времени для консольной балки (система SDOF), возбужденной периодической функцией. Vertical deformations and accelerations calculated with direct integration and modal analysis in RF‑/DYNAM Pro - Forced Vibrations are compared with the analytical solution.