Das Architectural Institute of Japan (AIJ) ставит Рейхе заранее на Benchmark-Szenarien für Windsimulation vorgestellt.
Der Nachfolgende Beitrag dreht sich dabei um den «Случай А - высотное здание формы 2: 1: 1».
Im Folgenden wird das beschriebene Szenario в RWIND2 nachgebildet und die Ergebnisse mit den simulierten und der Experimentellen Resultate des AIJ verglichen.
Целью данного контрольного примера является расчёт обтекания планера. Задача состоит в том, чтобы определить коэффициент лобового сопротивления и коэффициент подъёмной силы по отношению к углу атаки. Эти коэффициенты также можно изобразить на графике поляры сопротивления. Предельный угол ламинарного обтекания профиля крыла можно также можно определить по полю скоростей. Доступная 3D-модель CAD (файл STL) используется в RWIND 2.
Конструкция состоит из двутавровой балки и двух трубчатых ферм. The structure contains several imperfections and it is loaded by the force Fz. В данном примере не учитывается собственный вес. Determine the deflections uy and uz and axial rotation φx at the endpoint (Point 4). Данный контрольный пример основан на примере, представленном Gensichen и Lumpe.
A structure is made of two trusses of unequal length, which are embedded into the hinge supports. The structure is loaded by concentrated force. Собственный вес не учитывается. Determine the relationship between the loading force and the deflection, considering large deformations.
Биметрический пояс состоит из инвара и меди. The left end of the bimetallic strip is fixed, and the right end is free, loaded by temperature difference. While neglecting self-weight, determine the deflection of the bimetallic strip (free end).
Простая опёртая балка загружена чистым изгибом. Determine the critical load and corresponding load factor due to lateral buckling.
На верхнем конце затем закреплен стержень квадратного сечения. The rod is loaded by self-weight. For comparison, the example is also modeled with the concentrated force load, the value of which is equal to the gravity. The aim of this verification example is to show the difference between these types of loading, although the total loading force is equal.
В данном контрольном примере сравниваются расчеты ветровой нагрузки на здание с плоской кровлей по норме ASCE 7-16 и с помощью CFD моделирования в программе RWIND Simulation. The building is defined according to the sketch and the inflow velocity profile taken from the ASCE 7-16 standard.
В контрольном примере сравнивается расчет ветровой нагрузки на здание с двускатной крышей по норме EN 1991-1-4 и с помощью CFD моделирования в программе RWIND Simulation. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
В данном контрольном примере сравниваются расчеты ветровой нагрузки на здание с двускатной кровлей по норме ASCE 7-16 и с помощью CFD моделирования в программе RWIND Simulation. The building is defined according to the sketch and the inflow velocity profile taken from the ASCE 7-16 standard.
В контрольном примере сравнивается расчет ветровой нагрузки на здание с плоской кровлей по норме EN 1991-1-4 и с помощью моделирования CFD в программе RWIND Simulation. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
Определите изгибающий момент, действующий на свободный конец консоли, который изгибает стержень до круглой формы. Neglecting the beam's self-weight, assuming the large deformation analysis, and loading the cantilever with the moment, determine its maximum deflections.
У консоли с прямоугольным сечением на конце имеется масса. Furthermore, it is loaded by an axial force. Calculate the natural frequency of the structure. Neglect the self‑weight of the cantilever and consider the influence of the axial force for the stiffness modification.
Криволинейная балка состоит из двух балок с прямоугольным сечением. The horizontal beam is loaded by distributed loading. While neglecting self-weight, determine the maximum stress on the top surface of the horizontal beam.
Данный контрольный пример основан на контрольном примере 0122. A single-mass system without damping is subjected to an axial loading force. An ideal elastic-plastic material with characteristics is assumed. Determine the time course of the end-point deflection, velocity, and acceleration.
Простой осциллятор состоит из массы m (рассчитываемой только в направлении x) и линейной пружины с жесткостью k. The mass is embedded on a surface with Coulomb friction and is loaded by constant-in-time axial and transverse forces.
Деревянная балка, усиленная на концах двумя стальными пластинами, подвергается нагрузке давления. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.
Конструкция фермы состоит из трех стержней (один стальной и два медных), соединенных жестким стержнем. The structure is loaded by a concentrated force and a temperature difference. While neglecting self‑weight, determine the total deflection of the structure.
Деревянная балка, усиленная на концах двумя стальными пластинами, подвергается нагрузке давления. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.
Четыре колонны закреплены снизу и соединены жестким блоком наверху. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.
Этот пример является модификацией контрольного примера 0061; разница лишь в том, что материал резервуара несжимаемый. An open‑ended, thick‑walled vessel is loaded by both inner and outer pressure. While neglecting self‑weight, the radial deflection of the inner and the outer radius is determined.
Данный пример служит для демонстрации ограничения диафрагмы. The application is shown on a two-story structure. The structure is loaded by means of lateral forces according to Figure 1. Determine the maximum deflection of the structure ux in the direction of the loading forces using both the diaphragm constraint and the plate model of the floor.
Определите максимальный прогиб четырех колонн, закрепленных снизу и соединенных жестким блоком сверху. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled as orthotropic elastic material, and the inner columns as orthotropic elastic-plastic material with the same elastic parameters as the outer columns and plasticity properties defined according to the Tsai-Wu plasticity theory.
На обоих концах затем закреплен трехмерный блок из упруго-пластического материала. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai-Wu plasticity theory.
На обоих концах закреплен трехмерный блок из упруго-пластического материала с упрочнением. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai‑Wu plasticity theory.
A structure is made of two trusses, which are embedded into the hinge supports. The structure is loaded by concentrated force. Собственный вес не учитывается. Determine the relationship between the loading force and the deflection, considering large deformations.
Колонна состоит из бетонного сечения (прямоугольник 100/200) и стального сечения (профиль I 200). It is subjected to pressure force. Determine the critical load and corresponding load factor. The theoretical solution is based on the buckling of a simple beam. In this case, two regions have to be taken into account due to different moments of inertia and material properties.
Тонкое круглое кольцо прямоугольного сечения подвергается внешнему давлению. Determine the critical load and corresponding load factor for in-plane buckling.
Стойка с круглым сечением поддерживается в соответствии с четырьмя основными случаями потери устойчивости Эйлера и подвергается действию давления. Determine the critical load.
Контрольный пример описывает ветровые нагрузки в нескольких направлениях ветра на модели группы зданий. The model consists of eight cubes. The velocity fields obtained by the RWIND simulation are compared with the measured values from the experiment. The experimental data are measured using a thermistor anemometer in the wind tunnel.