Uma viga de betão armado foi dimensionada como viga de dois vãos em consola. A secção é variável ao longo do comprimento da consola (secção de secção variável). São calculados os esforços internos, assim como a armadura longitudinal e transversal necessária para o estado limite último.
Considere o vão da barra ASTM A992 W 18×50 apresentado na Figura 01 e as cargas permanentes e variáveis uniformes. A barra está limitada a uma altura máxima de 45,72 cm (18 pol.). A flecha da carga variável está limitada a L/360. A viga está apoiada de forma simples e contraventada de forma contínua. Verifique a resistência à flexão disponível da viga selecionada com base nos métodos LRFD e ASD.
Um dos objetivos deste exemplo de verificação é analisar o fluxo de fluido em torno do planador. A tarefa consiste em determinar o coeficiente de arrasto e o coeficiente de sustentação em relação ao ângulo de ataque. Estes coeficientes também podem ser introduzidos no diagrama da curva polar de arrasto. O ângulo limite para o fluxo de fluido laminar em torno do perfil da asa também pode ser determinado a partir do campo de velocidades. O modelo CAD 3D disponível (ficheiro STL) foi utilizado no RWIND 2.
Um cilindro feito de solo elasto-plástico é sujeito a condições de teste triaxial. Negligenciando o peso próprio, o objetivo é determinar a tensão vertical limite para a rotura por corte. É considerada uma tensão hidrostática inicial de 100 kPa.
Uma estrutura plana simétrica é constituída por oito treliças idênticas encastradas em apoios articulados. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point when the snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at the given deflections.
Uma membrana esférica de balão é preenchida com gás com pressão atmosférica e volume definido (estes valores são utilizados apenas para a definição do modelo de EF). Determine the overpressure inside the balloon due to the given isotropic membrane prestress. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Uma estrutura é constituída por quatro treliças encastradas em apoios articulados. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point, when snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at given deflections.
Considere o vão da barra ASTM A992 W 18×50 apresentado na Figura 01 e as cargas permanentes e variáveis uniformes. The member is limited to a maximum nominal depth of 18 inches. The live load deflection is limited to L/360. The beam is simply supported and continuously braced. Verify the available flexural strength of the selected beam, based on LRFD and ASD.
Uma viga curvada é constituída por duas vigas de secção retangular. The horizontal beam is loaded by distributed loading. While neglecting self-weight, determine the maximum stress on the top surface of the horizontal beam.
Uma estrutura de cobertura em casca sujeita a compressão e com as bordas retas livres é modelada enquanto os deslocamentos y e z são limitados nos cantos curvados. Neglecting self‑weight, compute the maximum (absolute) vertical deflection, and compare the results with COMSOL Multiphysics 4.3.
Um recipiente esférico de parede fina é sujeito a compressão interna. While neglecting self‑weight, determine the von Mises stress and the radial deflection of the vessel.
Uma barra de aço entre dois apoios rígidos com um intervalo é carregada por uma diferença de temperatura. While neglecting self‑weight, determine the total deformation of the rod and its internal axial force.
Uma consola com secção circular é carregada por forças de flexão e rotação concentradas. The aim of this verification example is to compare the reduced stress according to the von Mises and Tresca theories.
A two-layered, open-ended, thick-walled vessel is loaded by inner and outer pressure; therefore, there is no axial stress. É determinada a flecha radial do raio interior e exterior, bem como a compressão (tensão radial), não sendo considerado o peso próprio.
A compact disc (CD) rotates at a speed of 10,000 rpm. Está, por isso, sujeito a uma força centrífuga. The problem is modeled as a quarter model. Determine the tangential stress on the inner and outer diameters and the radial deflection of the outer radius.
Imaginemos um tubo de andaime resistente à flexão fixado por um apoio nodal para andaimes na parte inferior e carregado por um momento e por uma força. Calculate the maximum radial deflection by exceeding the capacity of the scaffolding support.
Quatro pilares estão fixados na parte inferior e ligados por um bloco rígido na parte superior. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.
Uma placa larga com uma abertura é carregada numa direção através de tensão de tração. The plate width is large with respect to the hole radius, and it is very thin, considering the state of the plane stress.