验算示例描述了作用在建筑物模型上多个风向的风荷载。 The model consists of eight cubes. The velocity fields obtained by the RWIND simulation are compared with the measured values from the experiment. The experimental data are measured using a thermistor anemometer in the wind tunnel.
验算示例描述了作用在建筑物地面墙壁上的压力荷载。 The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
验算示例描述了城市街道中的高层建筑周围流动(按比例模型)。 The example is given by the Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
验算示例由日本建筑协会(AIJ)提供, The chosen results (velocity magnitude) are compared with the measured values.
一个球面上有均匀的粘性流体流。 The velocity of the fluid is considered at infinity. The goal is to determine the drag force. The parameters of the problem are set so that the Reynolds number is small and the radius of the sphere is also small, thus the theoretical solution can be reached - Stokes flow (G. G. Stokes 1851).
该模型初始定义了一个具有间隙和两个弹簧的单质量系统的柔性体系。 Determine the natural oscillations of the system - deflection, velocity, and acceleration time course.
在两个同心圆柱体的两个半径半径之间的各向同性预应力拉伸膜,该预应力位于一个不与竖轴平行的平面上。 Find the final minimum shape of the membrane - the helicoid - and determine the surface area of the resulting membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
该验算示例是基于验算示例 0122 编写的. A single-mass system without damping is subjected to an axial loading force. An ideal elastic-plastic material with characteristics is assumed. Determine the time course of the end-point deflection, velocity, and acceleration.
一个对称的浅结构结构,由八个相同的桁架构件组成,这些桁架嵌在铰支座中。 The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point when the snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at the given deflections.
该结构由四个桁架杆件组成,桁架铰接。 The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point, when snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at given deflections.
布置了一块正交各向异性的矩形薄板,并施加均布压力。 The directions of axes x and y coincide with the principal directions. While neglecting self-weight, determine the maximum deflection of the plate.
设置阻尼器的单质量系统受到恒定的荷载。 Determine the deflection and velocity of the dashpot endpoint in the given test time.
本文模拟了一个受压壳屋面结构,其中直线边缘为自由边缘,弯曲边缘约束 y 方向和 z 方向平移边缘。 Neglecting self‑weight, compute the maximum (absolute) vertical deflection, and compare the results with COMSOL Multiphysics 4.3.
定义一个简单振动器,由质量 m(只考虑 x 方向)和刚度为 k 的弹簧组成。 The mass is embedded on a surface with Coulomb friction and is loaded by constant-in-time axial and transverse forces.
一栋两层单跨框架结构处于地震作用下。 The modulus of elasticity and cross‑section of the frame beams are much larger than those of the columns, so the beams can be considered rigid. The elastic response spectrum is given by the standard SIA 261/1:2003. Neglecting self-weight and assuming the lumped masses are at the floor levels, determine the natural frequencies of the structure. For each frequency obtained, specify the standardized displacements of the floors as well as equivalent forces generated using the elastic response spectrum according to the standard SIA 261/1.2003.
在其上端固定一根截面为正方形的拉杆。 The rod is loaded by self-weight. For comparison, the example is also modeled with the concentrated force load, the value of which is equal to the gravity. The aim of this verification example is to show the difference between these types of loading, although the total loading force is equal.
假设在脚手架底部设置了一个刚性圆筒,该圆筒由一个弯矩和一个力来定义。 Calculate the maximum deflection with consideration of initial slippage.
假设在脚手架底部设置了一个刚性圆筒,该圆筒由一个弯矩和一个力来定义。 Calculate the maximum radial deflection by exceeding the capacity of the scaffolding support.
通过周期函数对悬臂梁(SDOF 体系)进行时程分析。 Vertical deformations and accelerations calculated with direct integration and modal analysis in RF‑/DYNAM Pro - Forced Vibrations are compared with the analytical solution.
四根固定在底部的立柱,上部通过一个刚性试块相互连接。 The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.
左端支承一个 I 形截面的悬臂梁,图中显示了扭矩荷载。 The aim of this example is to compare the fixed support with the fork support and to investigate the behavior of some representative quantities. Comparison is also made to the solution by means of plates. Small deformations are considered, and the self-weight is neglected. Determine the rotation in the midpoint of the cantilever, and in case of the member entity with warping, determine the values of the primary torsional moment, the secondary torsional moment, and the warping moment both on the left end (point A) and the right end (point B).
定义悬臂梁为工字形,截面长度为 L。 The beam has five mass points with masses m acting in the X-direction. The self-weight is neglected. The frequencies, mode shapes, and equivalent loads of this 5-DOF system are analytically calculated and compared with the results from RSTAB and RFEM.
对该钢梁施加铰接,并在另一端进行弹簧支承。 Two cases with different spring stiffnesses are considered. The verification example solves the calculation of the load factors of the beam in the image using the linear stability analysis.