Um quarto de barra circular com uma secção retangular é carregado com uma força fora do plano. This force causes a bending moment, torsional moment, and transverse force. While neglecting self-weight, determine the total deflection of the curved beam.
A strut with a circular cross-section is supported according to four basic cases of Euler buckling and subjected to pressure force. Determine a carga de encurvadura crítica.
A sphere is subjected to a uniform flow of viscous fluid. A velocidade do líquido é considerada como infinita. The goal is to determine the drag force. The parameters of the problem are set so that the Reynolds number is small and the radius of the sphere is also small, thus the theoretical solution can be reached - Stokes flow (G. G. Stokes 1851).
A cantilever is loaded by a transversal and an axial force on the right end and is fully fixed on the left end. O problema é descrito pelo seguinte conjunto de parâmetros. The problem is solved by using the geometrically linear analysis, second-order analysis, and large deformation analysis.
Uma viga articulada nas duas extremidades é carregada com força concentrada no meio. Neglecting its self-weight and shear stiffness, determine the beam's maximum deflection, normal force, and moment at the mid-span, assuming the second- and third-order analysis.
Um oscilador simples é composto por massa m (a ser considerada apenas na direção x-) e pela mola linear com a rigidez k. The mass is embedded on a surface with Coulomb friction and is loaded by constant-in-time axial and transverse forces.
Um dos objetivos deste exemplo de verificação é analisar o fluxo de fluido em torno do planador. A tarefa consiste em determinar o coeficiente de arrasto e o coeficiente de sustentação em relação ao ângulo de ataque. Estes coeficientes também podem ser introduzidos no diagrama da curva polar de arrasto. O ângulo limite para o fluxo de fluido laminar em torno do perfil da asa também pode ser determinado a partir do campo de velocidades. O modelo CAD 3D disponível (ficheiro STL) foi utilizado no RWIND 2.
No exemplo de verificação, o cálculo da carga de vento num edifício com cobertura plana utilizando a norma EN 1991-1-4 é comparado com uma simulação CFD no RWIND Simulation. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
No exemplo de verificação, o cálculo de cargas de vento num edifício com cobertura de duas águas utilizando a norma EN 1991-1-4 é comparado com uma simulação CFD no RWIND Simulation. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
O Instituto de Arquitectura do Japão (AIJ) apresentou uma série de cenários de referência bem conhecidos para a simulação de vento. O seguinte artigo é sobre o "Caso E - um complexo de edifícios numa área urbana real com uma densidade alta de edifícios na cidade de Niigata". A seguir, o cenário descrito é simulado no RWIND2 e os resultados são comparados com resultados simulados e experimentais da AIJ.
This verification example compares wind load calculations on a duopitch roof building using the ASCE 7-16 standard and using CFD simulation in RWIND Simulation. O edifício é definido conforme o esboço e o perfil da velocidade do fluxo contido na norma ASCE 7-16.
A truss structure consists of three rods (one steel and two copper) joined by a rigid member. The structure is loaded by a concentrated force and a temperature difference. Determine a flecha total da estrutura, sem considerar o peso próprio.
O Instituto de Arquitectura do Japão (AIJ) apresentou uma série de cenários de referência bem conhecidos para a simulação de vento. O seguinte artigo trata do "Caso D - Torre entre quarteirões". A seguir, o cenário descrito é simulado no RWIND2 e os resultados são comparados com resultados simulados e experimentais da AIJ.
This verification example compares wind load calculations on a flat roof building using the ASCE 7-16 standard and using CFD simulation in RWIND Simulation. O edifício é definido conforme o esboço e o perfil da velocidade do fluxo contido na norma ASCE 7-16.
Uma barra de aço entre dois apoios rígidos com um intervalo é carregada por uma diferença de temperatura. While neglecting self‑weight, determine the total deformation of the rod and its internal axial force.
Este exemplo serve para ilustrar o plano. The application is shown on a two-story structure. The structure is loaded by means of lateral forces according to Figure 1. Determine the maximum deflection of the structure ux in the direction of the loading forces using both the diaphragm constraint and the plate model of the floor.
A viga está completamente fixada na extremidade esquerda (empenamento restringido) e apoiada na extremidade direita por um apoio de forquilha (empenamento possibilitado). The beam is subjected to a torque, longitudinal force, and transverse force. Determine the behavior of the primary torsional moment, secondary torsional moment, and warping moment. The verification example is based on the example introduced by Gensichen and Lumpe.
Análise de histórico de tempo na viga em consola (sistema SDOF) excitada por uma função periódica. Vertical deformations and accelerations calculated with direct integration and modal analysis in RF‑/DYNAM Pro - Forced Vibrations are compared with the analytical solution.
A structure made of an I-profile is fully fixed on the left end and embedded into the sliding support on the right end. A estrutura é constituída por dois segmentos. The self-weight is neglected in this example. Determine the maximum deflection of the structure, the bending moment on the fixed end, the rotation of segment 2, and the reaction force at point B by means of the geometrically linear analysis and the second-order analysis. The verification example is based on the example introduced by Gensichen and Lumpe.