В вилочные опоры затем встроена конструкция из двутаврового профиля. The axial rotation is restricted on both ends while warping is enabled. The structure is loaded by two transverse forces in the middle. The verification example is based on the example introduced by Gensichen and Lumpe.
Плоская ферма, состоящая из четырех наклонных стержней и одного вертикального стержня, загружена в верхнем узле вертикальной и внеплоской силой. Assuming the large deformation analysis and neglecting the self-weight, determine the normal forces of the members and the out-of-plane displacement of the upper node.
Мембрана растягивается посредством изотропного преднапряжения между двумя радиусами двух концентрических цилиндров, не лежащих в плоскости, параллельной вертикальной оси. Find the final minimum shape of the membrane - the helicoid - and determine the surface area of the resulting membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Труба с трубчатым сечением загружена внутренним давлением. This internal pressure causes axial deformation of the pipe (the Bourdon effect). Determine the axial deformation of the pipe endpoint.
- 000121
- Расчет
- RFEM 5
-
- RSTAB 8
- RF-DYNAM Pro | Natural Vibrations 5
- RF-DYNAM Pro | Forced Vibrations 5
- RF-DYNAM Pro | Equivalent Loads 5
- RF-DYNAM Pro | Nonlinear Time History 5 (нелинейное изменение во времени)
- DYNAM Pro | Natural Vibrations 8 (собственные колебания)
- DYNAM Pro | Equivalent Loads (Эквивалентные нагрузки) 8
- DYNAM Pro | Nonlinear Time History 8
Система единичных масс с амортизатором находится под действием постоянной нагруженной силы. Determine the spring force, damping force, and inertial force at the given test time. In this verification example, the Kelvin--Voigt dashpot (namely, a spring and a damper element in serial connection) is decomposed into its purely viscous and purely elastic parts, in order to better evaluate the reaction forces.
Криволинейная балка состоит из двух балок с прямоугольным сечением. The horizontal beam is loaded by distributed loading. While neglecting self-weight, determine the maximum stress on the top surface of the horizontal beam.
На канат в исходном положении действуют две сосредоточенные силы. The self‑weight is neglected. Determine the normal forces in the cable.
Простой осциллятор состоит из массы m (рассчитываемой только в направлении x) и линейной пружины с жесткостью k. The mass is embedded on a surface with Coulomb friction and is loaded by constant-in-time axial and transverse forces.
Стальной стержень между двумя жесткими опорами с зазором нагружен перепадом температур. While neglecting self‑weight, determine the total deformation of the rod and its internal axial force.
Двухэтажная однопролетная каркасная конструкция подвержена сейсмической нагрузке. The modulus of elasticity and cross‑section of the frame beams are much larger than those of the columns, so the beams can be considered rigid. The elastic response spectrum is given by the standard SIA 261/1:2003. Neglecting self-weight and assuming the lumped masses are at the floor levels, determine the natural frequencies of the structure. For each frequency obtained, specify the standardized displacements of the floors as well as equivalent forces generated using the elastic response spectrum according to the standard SIA 261/1.2003.
Данный пример служит для демонстрации ограничения диафрагмы. The application is shown on a two-story structure. The structure is loaded by means of lateral forces according to Figure 1. Determine the maximum deflection of the structure ux in the direction of the loading forces using both the diaphragm constraint and the plate model of the floor.
Деревянная балка, усиленная на концах двумя стальными пластинами, подвергается нагрузке давления. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.
На обоих концах затем закреплен трехмерный блок из упруго-пластического материала. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai-Wu plasticity theory.
Теперь можно определить максимальный прогиб трехмерного блока, защемленного на обоих концах. The block is divided in the middle: the upper half is made of an elastic material and the lower part is made of timber - an elasto-plastic othotropic material with the yield surface described according to the Tsai-Wu plasticity theory. The block's middle plane is subjected to vertical pressure.
Деревянная балка, усиленная на концах двумя стальными пластинами, подвергается нагрузке давления. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.
На обоих концах закреплен трехмерный блок из упруго-пластического материала с упрочнением. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai‑Wu plasticity theory.
Докажите, что соединение различных размерных элементов не влияет на результаты. A cantilever with a rectangular cross-section is fixed at one end and loaded at the other by concentrated forces. Neglecting its self-weight and assuming only small deformations, determine the cantilever's maximum deflections.