Considere un tubo de andamio rígido, fijado en la parte inferior utilizando el apoyo en nudo de andamio y cargado tanto por un momento como por una fuerza. Calculate the maximum deflection with consideration of initial slippage.
Este ejemplo de verificación se basa en el ejemplo de verificación 0122. A single-mass system without damping is subjected to an axial loading force. An ideal elastic-plastic material with characteristics is assumed. Determine the time course of the end-point deflection, velocity, and acceleration.
Determinar la flecha máxima y el momento radial máximo de una placa circular simplemente apoyada sometida a presión uniforme, temperatura uniforme y temperatura diferencial.
El ejemplo de verificación describe las cargas de viento en varias direcciones del viento en un modelo de un grupo de edificios. The model consists of eight cubes. The velocity fields obtained by the RWIND simulation are compared with the measured values from the experiment. The experimental data are measured using a thermistor anemometer in the wind tunnel.
Considere un tubo de andamio rígido, fijado en la parte inferior utilizando el apoyo en nudo de andamio y cargado tanto por un momento como por una fuerza. Calculate the maximum radial deflection by exceeding the capacity of the scaffolding support.
Una viga larga y delgada lleva una masa concentrada y está cargada por una fuerza dependiente del tiempo. It is simply supported. The problem is described using the following parameters. Determine the deflections in the given test times.
Una placa ortótropa cuadrada en capas está completamente fijada en su punto medio y sometida a presión. Compare las flechas de las esquinas de la placa para comprobar la corrección de la transformación.
Considere un tubo de andamio rígido, fijado en la parte inferior utilizando el apoyo en nudo de andamio y cargado tanto por un momento como por una fuerza. Self-weight is not considered. Considering an infinitely rigid beam, determine the maximum radial deflection.
Considere una viga W 18 x 50 según ASTM A992 para el vano y cargas vivas y muertas uniformes como se muestra en la figura 1. La barra está limitada a un canto nominal máximo de 18 pulgadas. La flecha de la carga viva está limitada a L/360. La viga está apoyada y arriostrada continuamente. Verifique la resistencia a flexión disponible de la viga seleccionada, según LRFD y ASD.
Un sistema de una sola masa con juego y dos muelles se deforma inicialmente. Determine the natural oscillations of the system - deflection, velocity, and acceleration time course.
Una viga de acero con una sección cuadrada está cargada con un esfuerzo axil y una carga distribuida. The image shows the calculation of the maximum bending deflection and critical load factor according to the second-order analysis.
Un recipiente de dos capas, de extremos abiertos y paredes gruesas está cargado por una presión interna y externa; por lo tanto, no hay tensión axil. While neglecting self‑weight, the radial deflection of the inner and outer radius, and the pressure (radial stress) in the middle radius is determined.
Un voladizo está completamente fijo en el extremo izquierdo y cargado por una fuerza transversal y una fuerza axil en el extremo derecho. The tensile strength is zero and the behavior in the compression remains elastic.
Un cable o membrana de acero con pasadores en ambos extremos se carga mediante una carga distribuida. Neglecting its self-weight, determine the maximum deflection of the structure using the large deformation analysis.
Un recipiente de paredes gruesas está cargado por una presión interna tal que el recipiente alcanza un estado elástico-plástico. While neglecting self‑weight, the analytical and numerical solutions for the radial position of the plastic zone border (under the Tresca hypothesis) are determined and compared.
Un voladizo de sección rectangular tiene una masa al final. Furthermore, it is loaded by an axial force. Calculate the natural frequency of the structure. Neglect the self‑weight of the cantilever and consider the influence of the axial force for the stiffness modification.
En la figura 01 se muestra una viga ASTM A992 W 24×62 con cortante en los extremos de 48.000 y 145.000 kips de las cargas muertas y vivas, respectivamente. Verify the available shear strength of the selected beam, based on LRFD and ASD.
Determine la flecha y la tensión máximas en la dirección z de la placa mixta, que consta de dos capas de vidrio y una capa de lámina intermedia, sometidas a una presión uniforme.
Un sistema monomasa con amortiguador está sometido a una fuerza de carga constante. Determine the spring force, damping force, and inertial force at the given test time. In this verification example, the Kelvin--Voigt dashpot (namely, a spring and a damper element in serial connection) is decomposed into its purely viscous and purely elastic parts, in order to better evaluate the reaction forces.