El ejemplo de verificación describe las cargas de presión en los muros de los edificios en una disposición en tándem ubicada a nivel del suelo. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
El ejemplo de verificación describe el flujo estacionario alrededor de un edificio de gran altura entre bloques de apartamentos (modelo a escala). The example is given by the Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
El ejemplo de verificación describe el flujo en estado estacionario alrededor de un edificio aislado (modelo a escala).El Architectural Institute of Japan (AIJ) proporciona el ejemplo. The chosen results (velocity magnitude) are compared with the measured values.
Se modela una estructura de cubierta de lámina bajo carga de presión donde los bordes rectos están libres, mientras que en los bordes curvos las traslaciones y y z están restringidas. Neglecting self‑weight, compute the maximum (absolute) vertical deflection, and compare the results with COMSOL Multiphysics 4.3.
A cantilever beam with an I-beam cross-section of length L is defined. The beam has five mass points with masses m acting in the X-direction. Se omite el peso propio. The frequencies, mode shapes, and equivalent loads of this 5-DOF system are analytically calculated and compared with the results from RSTAB and RFEM.