Das Zusatzmodul RF-STABIL ermittelt die Verzweigungslastfaktoren, Knicklängen und Eigenformen von RFEM-Modellen. Die Stabilitätsuntersuchungen können dabei nach verschiedenen Eigenwertmethoden erfolgen, die je nach System und Rechnerkonfiguration ihre Vorteile haben.
Le présent article traite des éléments dont la section est soumise simultanément à un moment fléchissant, à un effort tranchant et à un effort normal de compression ou de traction. Cependant, dans notre exemple nous n'intégrerons pas de sollicitations dues à un effort tranchant.
Utilizing the RF-STEEL AISC add-on module, steel member design is possible according to the AISC 360-16 standard. The following article will compare the results between calculating lateral torsional buckling according to Chapter F and Eigenvalue Analysis.
The National Building Code of Canada (NBC) 2015 Article 4.1.8.7 provides a clear procedure for earthquake methods of analysis. The more advanced method, the Dynamic Analysis Procedure in Article 4.1.8.12, should be used for all structure types except those that meet the criteria set forth in 4.1.8.7. The more simplistic method, the Equivalent Static Force Procedure (ESFP) in Article 4.1.8.11, can be used for all other structures.
Using the RF-TIMBER CSA module, timber column design is possible according to the CSA O86-19 standard. Accurately calculating timber member compressive resistance and adjustment factors is important for safety considerations and design. The following article will verify the factored compressive resistance in the RFEM add-on module RF-TIMBER CSA, using step-by-step analytical equations as per the CSA O86-19 standard including the column modification factors, factored compressive resistance, and final design ratio.
结构不仅可以计算和计算内力和变形, Es ist auch sicherzustellen, dass die Kräfte und Momente im Tragwerk zuverlässig weitergeleitet und in das Fundament übergeben werden. Die Dlubal-Produktpalette bietet eine Reihe von Modulen, mit denen sich Stahl- und Holzverbindungen nachweisen lassen. So besteht in RF-/JOINTS Stahl - Stützenfuß die Möglichkeit, Fußpunkte von gelenkigen oder eingespannten Stahlstützen zu untersuchen. Die Stützenfußplatten können dabei mit oder ohne Steifen ausgeführt werden.
In the AISC 360 – 14th Ed. C2.2, the direct analysis method requires initial imperfections to be taken into consideration. The important imperfection of recognition is column out-of-plumbness. According to C2.2a, the direct modeling of imperfections is one method to account for the effect of initial imperfections. However, in many situations, the expected displacements may not be known or easily predicted.
Requirements for the design of structural stability are given in the AISC 360 – 14th Ed. Chapter C. In particular, the direct analysis method provisions, previously located in Appendix 7 of the AISC 360 – 13th Ed., are described in detail. This method is considered an alternative to the effective length method, which in turn eliminates the need for effective length (K) factors other than 1.0.
在RF-/CONCRETE、RF-/CONCRETE Columns和RF-/FOUNDATION Pro中可以导出每个国家按照欧洲规范 EN 1992-1-1的参数。 Dabei stehen die Schnittstellen zu MS Excel und CSV zur Verfügung. Durch den Export der nationalen Parameter können diese zum Beispiel in MS Excel aufbereitet und eventuelle Unterschiede zwischen einzelnen nationalen Anhängen übersichtlich dargestellt werden (siehe Bild).