Determine analíticamente la constante de torsión para la sección del tubo (área anular) y compare los resultados con la solución numérica en RFEM 5 y RSTAB 8 para varios espesores de pared.
Un voladizo de una sección rectangular se encuentra sobre un apoyo elástico de Winkler y se carga mediante una carga distribuida. The image shows the calculation of the maximum deflection and maximum bending moment.
Una viga de acero con una sección cuadrada está cargada con un esfuerzo axil y una carga distribuida. The image shows the calculation of the maximum bending deflection and critical load factor according to the second-order analysis.
Una viga de acero cargada axialmente con una sección cuadrada está articulada en un extremo y apoyada en un muelle en el otro. Two cases with different spring stiffnesses are considered. The verification example solves the calculation of the load factors of the beam in the image using the linear stability analysis.
Una placa ortótropa cuadrada en capas está completamente fijada en su punto medio y sometida a presión. Compare the deflections of the plate corners to check the correctness of the transformation.
Un voladizo con fibras que no discurren en dirección del eje de la viga desde una sección cuadrada con presión de tracción. Calculate the maximum deflection.
Un bloque tridimensional hecho de material elástico-plástico está fijado en ambos extremos. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai-Wu plasticity theory.
Determinar la flecha máxima de un bloque tridimensional fijo en ambos extremos. The block is divided in the middle: the upper half is made of an elastic material and the lower part is made of timber - an elasto-plastic othotropic material with the yield surface described according to the Tsai-Wu plasticity theory. The block's middle plane is subjected to vertical pressure.
Determine la flecha máxima de cuatro pilares fijos en la parte inferior y conectados por un bloque rígido en la parte superior. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled as orthotropic elastic material, and the inner columns as orthotropic elastic-plastic material with the same elastic parameters as the outer columns and plasticity properties defined according to the Tsai-Wu plasticity theory.
Una viga de madera reforzada con dos placas de acero en los extremos está cargada por presión. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.
Un bloque tridimensional hecho de material elástico-plástico con endurecimiento está fijado en ambos extremos. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai‑Wu plasticity theory.
Un voladizo está completamente fijo en el extremo izquierdo y cargado por una fuerza transversal y una fuerza axil en el extremo derecho. The tensile strength is zero and the behavior in the compression remains elastic.
Determine las flechas máximas del bloque considerando o omitiendo el efecto cortante. The square block of the isotropic material is fully fixed at one end and loaded with uniform vertical pressure.
Determine la flecha y la tensión máximas en la dirección z de la placa mixta, que consta de dos capas de vidrio y una capa de lámina intermedia, sometidas a una presión uniforme.
Una placa ancha con un agujero está cargada en una dirección por la tensión de tracción. The plate width is large with respect to the hole radius, and it is very thin, considering the state of the plane stress.
Demuestre que el acoplamiento de diferentes elementos dimensionales no afecta a los resultados. A cantilever with a rectangular cross-section is fixed at one end and loaded at the other by concentrated forces. Neglecting its self-weight and assuming only small deformations, determine the cantilever's maximum deflections.
Una viga de madera reforzada con dos placas de acero en los extremos está cargada por presión. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.
Cuatro pilares están fijos en la parte inferior y conectados por un bloque rígido en la parte superior. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.
Un voladizo de sección variable está completamente fijado en el extremo izquierdo y cargado por una carga continua. Plastic material is considered for the calculation.
Determinar el desplazamiento máximo, las tensiones en el plano y las relaciones de tensiones de una placa de vidrio de doble panel simplemente apoyada con una lámina entre ambos paneles de vidrio sometida a una presión uniforme.
Determine la flecha máxima del voladizo que consta de dos capas de vidrio y una capa de lámina intermedia. The plate is fully fixed at one end and subjected to uniform pressure.
Un cable o membrana de acero con pasadores en ambos extremos se carga mediante una carga distribuida. Neglecting its self-weight, determine the maximum deflection of the structure using the large deformation analysis.
Un voladizo vertical con una sección cuadrada está cargado en la parte superior por la presión de tracción. The cantilever consists of an isotropic material. Calculate the deflection.
Determine el momento flector que, actuando en el extremo libre del voladizo, doblará la barra en una forma circular. Neglecting the beam's self-weight, assuming the large deformation analysis, and loading the cantilever with the moment, determine its maximum deflections.
A structure is made of two trusses, which are embedded into the hinge supports. The structure is loaded by concentrated force. Se omite el peso propio. Determine the relationship between the loading force and the deflection, considering large deformations.
Una estructura hecha de cerchas de perfil en I está apoyada en ambos extremos mediante apoyos deslizantes de muelles y cargada por fuerzas transversales. The self-weight is neglected in this example. Determine the deflection of the structure, the bending moment, the normal force in the given test points, and the horizontal deflection of the spring supports.
Una viga está completamente fija (el alabeo está restringido) en el extremo izquierdo y está apoyada en un apoyo en horquilla (el alabeo está habilitado) en el extremo derecho. The beam is subjected to a torque, longitudinal force, and transverse force. Determine the behavior of the primary torsional moment, secondary torsional moment, and warping moment. The verification example is based on the example introduced by Gensichen and Lumpe.
Una viga articulada en ambos extremos está cargada con una fuerza concentrada en el medio. Neglecting its self-weight and shear stiffness, determine the beam's maximum deflection, normal force, and moment at the mid-span, assuming the second- and third-order analysis.
Un voladizo de perfil en I está apoyado en el extremo izquierdo y cargado por el par. The aim of this example is to compare the fixed support with the fork support and to investigate the behavior of some representative quantities. Comparison is also made to the solution by means of plates. Small deformations are considered, and the self-weight is neglected. Determine the rotation in the midpoint of the cantilever, and in case of the member entity with warping, determine the values of the primary torsional moment, the secondary torsional moment, and the warping moment both on the left end (point A) and the right end (point B).