Una cercha plana que consta de cuatro barras inclinadas y una barra vertical está cargada en el nudo superior por medio de una fuerza vertical y una fuerza fuera del plano. Assuming the large deformation analysis and neglecting the self-weight, determine the normal forces of the members and the out-of-plane displacement of the upper node.
Se selecciona una barra en forma de W de ASTM A992 para soportar una carga muerta de 30.000 kips y una carga viva de 90.000 kips en tracción. Verify the member strength using both LRFD and ASD.
Un muelle helicoidal estrechamente enrollado está cargado por una fuerza de compresión. The spring has middle diameter D, wire diameter d, and it consists of i turns. The total length of the spring is L. Determine the total deflection of the spring for the member model and one‑turn deflection for the solid model.
Una barra ligeramente inclinada está cargada por una fuerza concentrada, sostenida por un muelle en un extremo y apoyada en el otro extremo. Assuming large deformations and neglecting the member's self-weight, determine its maximum upward deflection.
Un voladizo de perfil en I está apoyado en el extremo izquierdo y cargado por el par. The aim of this example is to compare the fixed support with the fork support and to investigate the behavior of some representative quantities. Comparison is also made to the solution by means of plates. Small deformations are considered, and the self-weight is neglected. Determine the rotation in the midpoint of the cantilever, and in case of the member entity with warping, determine the values of the primary torsional moment, the secondary torsional moment, and the warping moment both on the left end (point A) and the right end (point B).