Una barra con las condiciones de contorno dadas está cargada por el momento torsor y el esfuerzo axil. Omitiendo su peso propio, determine la deformación torsional máxima de la viga, así como su momento torsor interno, definido como la suma de un momento torsor primario y un momento torsor causado por el esfuerzo axil. Proporcione una comparación de esos valores asumiendo o ignorando la influencia del esfuerzo axil. El ejemplo de verificación se basa en el ejemplo presentado por Gensichen y Lumpe.
Una viga está completamente fija (el alabeo está restringido) en el extremo izquierdo y apoyada en un apoyo en horquilla (alabeo libre) en el extremo derecho. La viga está sometida a un par, una fuerza longitudinal y una fuerza transversal. Determinar el comportamiento del momento torsor primario, momento torsor secundario y momento de alabeo. El ejemplo de verificación se basa en el ejemplo presentado por Gensichen y Lumpe (ver referencia).
Un sistema de una sola masa con juego y dos muelles se deforma inicialmente. Determine the natural oscillations of the system - deflection, velocity, and acceleration time course.
Un voladizo de pared delgada de un perfil QRO está completamente fijado en el extremo izquierdo y el alabeo está habilitado. The cantilever is subjected to torque. Small deformations are considered, and the self-weight is neglected. Determine the maximum rotation, primary moment, secondary moment, and warping moment. The verification example is based on the example introduced by Gensichen and Lumpe.
Una barra con las condiciones de contorno dadas está cargada por el momento torsor y el esfuerzo axil. Neglecting its self-weight, determine the beam's maximum torsional deformation as well as its inner torsional moment, defined as the sum of a primary torsional moment and torsional moment caused by the normal force. Provide a comparison of those values while assuming or neglecting the influence of the normal force. The verification example is based on the example introduced by Gensichen and Lumpe.
Una viga está completamente fija (el alabeo está restringido) en el extremo izquierdo y está apoyada en un apoyo en horquilla (el alabeo está habilitado) en el extremo derecho. The beam is subjected to a torque, longitudinal force, and transverse force. Determine the behavior of the primary torsional moment, secondary torsional moment, and warping moment. The verification example is based on the example introduced by Gensichen and Lumpe.
Un voladizo de perfil en I está apoyado en el extremo izquierdo y cargado por el par. The aim of this example is to compare the fixed support with the fork support and to investigate the behavior of some representative quantities. Comparison is also made to the solution by means of plates. Small deformations are considered, and the self-weight is neglected. Determine the rotation in the midpoint of the cantilever, and in case of the member entity with warping, determine the values of the primary torsional moment, the secondary torsional moment, and the warping moment both on the left end (point A) and the right end (point B).