Con el uso del módulo RF-TIMBER CSA, es posible el dimensionamiento de pilares de madera según la norma canadiense CSA O86-19 con el método ASD. El cálculo preciso de la capacidad de compresión de barras de madera y los factores de ajuste son importantes para las consideraciones de la seguridad y el diseño. The following article will verify the factored compressive resistance in the RFEM add-on module RF-TIMBER CSA, using step-by-step analytical equations as per the CSA O86-19 standard including the column modification factors, factored compressive resistance, and final design ratio.
Al utilizar el módulo RF-TIMBER CSA, se puede calcular una viga de madera según el método ASD de la norma CSA O86-14. La capacidad de resistencia a flexión de la barra de madera y los coeficientes de ajuste son muy importantes para las consideraciones de seguridad y el cálculo. The following article will verify the factored bending moment resistance in the RFEM add-on module RF-TIMBER CSA using step-by-step analytical equations as per the CSA O86-14 standard including the bending modification factors, factored bending moment resistance, and final design ratio.
Requirements for the design of structural stability are given in the AISC 360 – 14th Ed. Chapter C. In particular, the direct analysis method provisions, previously located in Appendix 7 of the AISC 360 – 13th Ed., are described in detail. This method is considered an alternative to the effective length method, which in turn eliminates the need for effective length (K) factors other than 1.0.