L'esempio di verifica descrive i carichi di pressione sulle pareti di edifici in disposizione in tandem situati a livello del suolo. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
L'esempio di verifica descrive il flusso in stato stazionario attorno a un grattacielo in blocchi urbani (modello in scala). The example is given by the Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
L'esempio di verifica descrive il flusso in stato stazionario attorno a un edificio isolato (modello in scala).L'esempio è fornito dall'Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
Una struttura di copertura a guscio sotto carico di pressione è modellata dove i bordi diritti sono liberi, mentre sui bordi curvi le traslazioni y e z sono vincolate. Neglecting self‑weight, compute the maximum (absolute) vertical deflection, and compare the results with COMSOL Multiphysics 4.3.
A cantilever beam with an I-beam cross-section of length L is defined. The beam has five mass points with masses m acting in the X-direction. Il peso proprio è trascurato. The frequencies, mode shapes, and equivalent loads of this 5-DOF system are analytically calculated and compared with the results from RSTAB and RFEM.