Utilizing the RF-STEEL AISC add-on module, steel member design is possible according to the AISC 360-16 standard. The following article will compare the results between calculating lateral torsional buckling according to Chapter F and Eigenvalue Analysis.
Using the RF-TIMBER CSA module, timber column design is possible according to the CSA O86-19 standard. Accurately calculating timber member compressive resistance and adjustment factors is important for safety considerations and design. The following article will verify the factored compressive resistance in the RFEM add-on module RF-TIMBER CSA, using step-by-step analytical equations as per the CSA O86-19 standard including the column modification factors, factored compressive resistance, and final design ratio.
Using the RF-TIMBER CSA module, timber beam design is possible according to the CSA O86-14 standard. Accurately calculating timber member bending resistance and adjustment factors is important for safety considerations and design. The following article will verify the factored bending moment resistance in the RFEM add-on module RF-TIMBER CSA using step-by-step analytical equations as per the CSA O86-14 standard including the bending modification factors, factored bending moment resistance, and final design ratio.
说到 ASCE 7 中建筑结构上的风荷载,可以找到大量的资源来补充设计规范和帮助工程师处理这种侧向荷载。 However, engineers may find it more difficult to find similar resources for wind loading on non-building type structures. This article will examine the steps to calculate and apply wind loads as per ASCE 7-16 on a circular reinforced concrete tank with a dome roof.
Design loads specified in the AASHTO Bridge Design Specification are available in the RF-MOVE Surfaces moving load library. Design Truck (HS-20), Tandem, Type 3, and Overload are available options.
损伤等效系数取决于在RF-/STEEL Fatigue Members中设计的各个构件,并在相应的规范中进行了说明。 Die folgende Auflistung zeigt einen Überblick über die Normen, in denen die Berechnung der Schadensäquialenzfaktoren explizit geregelt ist:
在CONCRETE和RF-CONCRETE Members中,可以在窗口3.1或3.2中打开现有钢筋的三维渲染图。 Dort ist es nun auch möglich, unterschiedliche Bewehrungsansichten in mehreren Dialogfenstern gleichzeitig anzeigen zu lassen. Die aus RFEM bekannte Auswahl "Isometrie mit 3 Ansichten" steht auch hier zur Verfügung.
通过在 RF-CONCRETE Members 和 CONCRETE 中使用 OSG 图形来显示设计配筋,现在用户可以直接在图形中选择钢筋的位置。 Mittels rechtem Mausklick öffnet sich ein Kontextmenü, mit dem die gewählte Bewehrungsposition editiert, kopiert oder gelöscht werden kann.
When defining nodal loads, you have several simple options to rotate them:~ Rotation by means of an angle around the global coordinate axes in a certain order~ Orientation at a user-defined coordinate system~ Direction to a particular node~ Alignment by means of两个节点~在杆件/线的方向上
在版本 RFEM 5.04.0024 和 RSTAB 8.04.0024 中,您可以在模块 RF-/TOWER Loading 中定义天线覆冰荷载。 Es stehen Werte aus Herstellerbibliotheken zur Verfügung. Außerdem können Eislasten manuell definiert oder auf Grundlage einer vereinfachten Geometrie berechnet werden.
在 RF-/TOWER load 中对圆形四面塔架和方形三面塔架进行了扩展,增加了力系数。 Die Ermittlung der Kraftbeiwerte für abgerundete Profile erfolgt mit Hilfe der Reynolds-Zahl. Bisher konnte man für vierseitige Maste lediglich kantige Profile und für dreiseitige Maste abgerundete Profile verwenden.