Ejemplos de verificación
Los programas de Dlubal Software proporcionan cálculos comprensibles de análisis de estructuras. No son una "caja negra". Los ejemplos de verificación disponibles en esta página explican cómo funciona el software y revelan los métodos de cálculo.
Demuestre que el acoplamiento de diferentes elementos dimensionales no afecta a los resultados. A cantilever with a rectangular cross-section is fixed at one end and loaded at the other by concentrated forces. Neglecting its self-weight and assuming only small deformations, determine the cantilever's maximum deflections.
El Instituto de Arquitectura de Japón (AIJ) ha eine Reihe an bekannten Benchmark-Szenarien für Windsimulation vorgestellt.
Der Nachfolgende Beitrag dreht sich dabei um den "Caso A - Edificio de gran altura con una forma 2: 1: 1".
Im Folgenden wird das beschriebene Szenario in RWIND2 nachgebildet und die Ergebnisse mit den simulierten und der experimentantellen Resultate des AIJ verglichen.
Una placa rectangular simplemente apoyada está sujeta a diferentes tipos de carga. Assuming only the small deformation theory and neglecting self-weight, determine the deflection at its centroid for each load type.
Un voladizo de acero con una sección rectangular está completamente fijo en un lado y libre en el otro. The aim of this verification example is to determine the natural frequencies of the structure.
Se aplica una fuerza concentrada durante un corto período de tiempo en la mitad del vano de una viga simplemente apoyada. Considering only the small deformation theory and assuming that the mass of the beam is concentrated at its mid‑span, determine its maximum deflection.
Una estructura superficial simétrica se compone de ocho barras de celosía iguales, que están incrustadas en los apoyos de las articulaciones. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point when the snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at the given deflections.
Se selecciona una barra en forma de W de ASTM A992 para soportar una carga muerta de 30.000 kips y una carga viva de 90.000 kips en tracción. Verify the member strength using both LRFD and ASD.
Se selecciona una barra en forma de W de ASTM A992 para soportar una carga muerta de 30.000 kips y una carga viva de 90.000 kips en tracción. Se verifica la resistencia de la barra usando tanto el método LRFD como ASD.
Un cable en la posición inicial está cargado por dos fuerzas concentradas. The self‑weight is neglected. Determine the normal forces in the cable.
Un cable o membrana de acero con pasadores en ambos extremos se carga mediante una carga distribuida. Neglecting its self-weight, determine the maximum deflection of the structure using the large deformation analysis.
Determine las resistencias requeridas y los factores de longitud eficaz para las columnas de material ASTM A992 en el pórtico resistente a momento que se muestra en la figura 01 para la combinación de carga de gravedad máxima, utilizando LRFD y ASD.
Una fuerza concentrada se aplica repentinamente en la mitad del vano de una viga simplemente apoyada en un momento dado. Considering only the small deformation theory, determine the maximum deflection of the beam.
Un disco compacto (CD) gira a una velocidad de 10.000 rpm. Therefore, it is subjected to centrifugal force. The problem is modeled as a quarter model. Determine the tangential stress on the inner and outer diameters and the radial deflection of the outer radius.
Un voladizo con una sección circular está cargado por una fuerza de flexión concentrada y un momento de torsión. The aim of this verification example is to compare the reduced stress according to the von Mises and Tresca theories.
Una barra con una sección cuadrada está fijada en el extremo superior. The rod is loaded by self-weight. For comparison, the example is also modeled with the concentrated force load, the value of which is equal to the gravity. The aim of this verification example is to show the difference between these types of loading, although the total loading force is equal.
Una consola hecha de un redondo está cargada por una carga uniforme excéntrica. Determine the maximum deflection and maximum twist of the console using the geometrically linear analysis.
El ejemplo de verificación describe las cargas de presión en los muros de los edificios en una disposición en tándem ubicada a nivel del suelo. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
El ejemplo de verificación compara el cálculo de la carga de viento en un edificio con una cubierta a dos aguas utilizando la norma EN 1991-1-4 y utilizando la simulación CFD en RWIND Simulation. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
El ejemplo de verificación compara el cálculo de la carga de viento en un edificio con una cubierta plana utilizando la norma EN 1991-1-4 y utilizando la simulación CFD en RWIND Simulation. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
Este ejemplo de verificación compara los cálculos de la carga de viento en un edificio de cubierta plana utilizando la norma ASCE 7-16 y utilizando la simulación CFD en RWIND Simulation. The building is defined according to the sketch and the inflow velocity profile taken from the ASCE 7-16 standard.
Este ejemplo de verificación compara los cálculos de la carga de viento en un edificio con cubierta a dos aguas utilizando la norma ASCE 7-16 y utilizando la simulación CFD en RWIND Simulation. The building is defined according to the sketch and the inflow velocity profile taken from the ASCE 7-16 standard.
El ejemplo de verificación describe el flujo en estado estacionario alrededor de un edificio aislado (modelo a escala).El Architectural Institute of Japan (AIJ) proporciona el ejemplo. The chosen results (velocity magnitude) are compared with the measured values.
A cantilever beam with an I-beam cross-section of length L is defined. The beam has five mass points with masses m acting in the X-direction. Se omite el peso propio. The frequencies, mode shapes, and equivalent loads of this 5-DOF system are analytically calculated and compared with the results from RSTAB and RFEM.
Una consola hecha de un redondo está cargada por una fuerza transversal excéntrica. Determine the maximum deflection and maximum twist of the console using the geometrically linear analysis.
Un cable muy rígido está suspendido entre dos apoyos. Determine the equilibrium shape of the cable (the catenary), consider the gravitational acceleration, and neglect the stiffness of the cable. Verify the position of the cable at the given test points.
Una membrana cilíndrica se estira por medio de un pretensado isótropo. Find the final minimal shape of the membrane - catenoid. Determine the maximum radial deflection of the membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Determine la posición y del centro de gravedad para los cuerpos dados, a saber, el semicírculo, el semidisco, la cáscara semiesférica y la semibola.
Una cercha plana que consta de cuatro barras inclinadas y una barra vertical está cargada en el nudo superior por medio de una fuerza vertical y una fuerza fuera del plano. Assuming the large deformation analysis and neglecting the self-weight, determine the normal forces of the members and the out-of-plane displacement of the upper node.
Este ejemplo sirve como demostración de la coacción del diafragma. The application is shown on a two-story structure. The structure is loaded by means of lateral forces according to Figure 1. Determine the maximum deflection of the structure ux in the direction of the loading forces using both the diaphragm constraint and the plate model of the floor.
Una placa ortótropa cuadrada en capas está completamente fijada en su punto medio y sometida a presión. Compare the deflections of the plate corners to check the correctness of the transformation.