L'exemple de vérification décrit les charges de pression sur les voiles des bâtiments disposés en parallèle au niveau du sol. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
L'exemple de vérification décrit le flux stationnaire autour d'un bâtiment isolé (modèle à l'échelle) à l'aide d'un exemple de l'AIJ (Architectural Institute of Japan). The chosen results (velocity magnitude) are compared with the measured values.
Une barre avec les conditions aux limites données est chargée par un moment de torsion et un effort normal. Neglecting its self-weight, determine the beam's maximum torsional deformation as well as its inner torsional moment, defined as the sum of a primary torsional moment and torsional moment caused by the normal force. Provide a comparison of those values while assuming or neglecting the influence of the normal force. The verification example is based on the example introduced by Gensichen and Lumpe.
Un porte-à-faux profilé en I est supporté à l'extrémité gauche et chargé par un couple. The aim of this example is to compare the fixed support with the fork support and to investigate the behavior of some representative quantities. Comparison is also made to the solution by means of plates. Small deformations are considered, and the self-weight is neglected. Determine the rotation in the midpoint of the cantilever, and in case of the member entity with warping, determine the values of the primary torsional moment, the secondary torsional moment, and the warping moment both on the left end (point A) and the right end (point B).