Das Architectural Institute of Japan (AIJ) hat eine Reihe an bekannten Benchmark-Szenarien für Windsimulation vorgestellt. Der Nachfolgende Beitrag dreht sich dabei um den « Cas A - Immeuble de grande hauteur de forme 2:1:1 ». Im Folgenden wird das beschriebene Szenario in RWIND2 nachgebildet und die Ergebnisse mit den simulierten und der experimentellen Resultate des AIJ verglichen.
L'exemple de vérification décrit les charges de pression sur les voiles des bâtiments disposés en parallèle au niveau du sol. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
L'exemple de vérification décrit le flux stationnaire autour d'un bâtiment isolé (modèle à l'échelle) à l'aide d'un exemple de l'AIJ (Architectural Institute of Japan). The chosen results (velocity magnitude) are compared with the measured values.
Une membrane est tendue au moyen d'une précontrainte isotrope entre deux rayons de deux cylindres concentriques ne se trouvant pas dans un plan parallèle à l'axe vertical. Find the final minimum shape of the membrane - the helicoid - and determine the surface area of the resulting membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Une structure de toiture en coque est modélisée là où les bords droits sont libres, tandis que les translations y et z sont contraintes sur les bords courbes. Neglecting self‑weight, compute the maximum (absolute) vertical deflection, and compare the results with COMSOL Multiphysics 4.3.
Considérez un tube d'échafaudage rigide, fixé en bas à l'aide de l'appui nodal d'échafaudage et chargé à la fois par un moment et une force. Calculate the maximum deflection with consideration of initial slippage.
Quatre poteaux sont encastrés en bas et reliés par un bloc rigide en haut. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.
A cantilever beam with an I-beam cross-section of length L is defined. The beam has five mass points with masses m acting in the X-direction. le poids propre est négligé. The frequencies, mode shapes, and equivalent loads of this 5-DOF system are analytically calculated and compared with the results from RSTAB and RFEM.