Das Architectural Institute of Japan (AIJ) hat eine Reihe an bekannten Benchmark-Szenarien für Windsimulation vorgestellt. Der Nachfolgende Beitrag dreht sich dabei um den « Cas A - Immeuble de grande hauteur de forme 2:1:1 ». Im Folgenden wird das beschriebene Szenario in RWIND2 nachgebildet und die Ergebnisse mit den simulierten und der experimentellen Resultate des AIJ verglichen.
Une plaque rectangulaire sur appuis simples est chargée de différents types de charge. Assuming only the small deformation theory and neglecting self-weight, determine the deflection at its centroid for each load type.
Un porte-à-faux en acier de section rectangulaire est encastré d'un côté et libre de l'autre. The aim of this verification example is to determine the natural frequencies of the structure.
Une force concentrée est appliquée pendant une courte période de temps au centre de la travée d’une poutre sur appui simple. Considering only the small deformation theory and assuming that the mass of the beam is concentrated at its mid‑span, determine its maximum deflection.
Considérez un tube d'échafaudage rigide, fixé en bas à l'aide de l'appui nodal d'échafaudage et chargé à la fois par un moment et une force. Self-weight is not considered. Considering an infinitely rigid beam, determine the maximum radial deflection.
Considérez un tube d'échafaudage rigide, fixé en bas à l'aide de l'appui nodal d'échafaudage et chargé à la fois par un moment et une force. Calculate the maximum deflection with consideration of initial slippage.
Considérez un tube d'échafaudage rigide, fixé en bas à l'aide de l'appui nodal d'échafaudage et chargé à la fois par un moment et une force. Calculate the maximum radial deflection by exceeding the capacity of the scaffolding support.
Une membrane de diaphragme sphérique est remplie de gaz avec une pression atmosphérique et un volume défini (ces valeurs sont utilisées uniquement pour la définition du modèle EF). Determine the overpressure inside the balloon due to the given isotropic membrane prestress. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Une barre en forme de W selon la norme ASTM A992 est sélectionnée pour supporter une charge permanente de 30 000 kips et une charge d'exploitation de 90 000 kips en traction. Verify the member strength using both LRFD and ASD.
Une barre en forme de W selon la norme ASTM A992 est sélectionnée pour supporter une charge permanente de 30 000 kips et une charge d'exploitation de 90 000 kips en traction. Vérifiez la résistance de la barre à l'aide du calcul du facteur de charge et de résistance (LRFD) et de la conception de la résistance admissible (ASD).
Une bande bi métallique est composée d'invar et de cuivre. The left end of the bimetallic strip is fixed, and the right end is free, loaded by temperature difference. While neglecting self-weight, determine the deflection of the bimetallic strip (free end).
Un câble en acier ou une membrane avec des axes aux deux extrémités est chargé par une charge distribuée. Neglecting its self-weight, determine the maximum deflection of the structure using the large deformation analysis.
Déterminez les résistances et les facteurs de longueur efficace requis pour les poteaux du matériau ASTM A992 dans le portique des moments illustrés dans la Figure 1 pour la combinaison de charges de gravité maximale, à l'aide du LRFD et de l'ASD.
Un câble très rigide est suspendu entre deux appuis. Determine the equilibrium shape of the cable (the catenary), consider the gravitational acceleration, and neglect the stiffness of the cable. Verify the position of the cable at the given test points.
Une membrane cylindrique est tendue à l'aide d'une précontrainte isotrope. Find the final minimal shape of the membrane - catenoid. Determine the maximum radial deflection of the membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
Déterminez la position y du centre de gravité pour les corps donnés, à savoir les demi-cercles, les demi-disques, les coques hélicoïdales et les demi-sphères.
Une force concentrée est soudainement appliquée au centre de la travée d'une poutre sur deux appuis simples. Considering only the small deformation theory, determine the maximum deflection of the beam.
Un disque compact (CD) tourne à une vitesse de 10 000 t/min. Therefore, it is subjected to centrifugal force. The problem is modeled as a quarter model. Determine the tangential stress on the inner and outer diameters and the radial deflection of the outer radius.
Un porte-à-faux à section circulaire est chargé par une force de flexion et un moment de flexion concentrés. The aim of this verification example is to compare the reduced stress according to the von Mises and Tresca theories.
Une charge excentrique uniforme s'exerce sur une console constituée d'une barre ronde. Determine the maximum deflection and maximum twist of the console using the geometrically linear analysis.
L'exemple de vérification décrit les charges de pression sur les voiles des bâtiments disposés en parallèle au niveau du sol. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
Cet exemple de vérification compare le calcul des charges de vent sur un bâtiment avec une toiture à deux versants selon la norme ASCE 7-16 et celui de la simulation CFD dans RWIND Simulation. The building is defined according to the sketch and the inflow velocity profile taken from the ASCE 7-16 standard.
The verification example compares wind load calculation on a building with a flat roof using the standard EN 1991-1-4 and using CFD simulation in RWIND Simulation. Le bâtiment est défini d'après le croquis et le profil de vitesse d'afflux est calculé selon la norme EN 1991-1-4.
Cet exemple de vérification compare le calcul des charges de vent sur une toiture terrasse selon la norme ASCE 7-16 et celui de la simulation CFD dans RWIND Simulation. The building is defined according to the sketch and the inflow velocity profile taken from the ASCE 7-16 standard.
L'exemple de vérification compare le calcul de la charge de vent sur un bâtiment avec une toiture à deux versants à l'aide de la norme EN 1991-1-4 et de la simulation CFD dans RWIND Simulation. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
L'exemple de vérification décrit le flux stationnaire autour d'un bâtiment isolé (modèle à l'échelle) à l'aide d'un exemple de l'AIJ (Architectural Institute of Japan). The chosen results (velocity magnitude) are compared with the measured values.
A cantilever beam with an I-beam cross-section of length L is defined. The beam has five mass points with masses m acting in the X-direction. le poids propre est négligé. The frequencies, mode shapes, and equivalent loads of this 5-DOF system are analytically calculated and compared with the results from RSTAB and RFEM.
Une force transversale excentrée s'exerce sur une console constituée d'une barre ronde. Determine the maximum deflection and maximum twist of the console using the geometrically linear analysis.
Une structure à travée simple sur deux niveaux est soumise à des charges sismiques. The modulus of elasticity and cross‑section of the frame beams are much larger than those of the columns, so the beams can be considered rigid. The elastic response spectrum is given by the standard SIA 261/1:2003. Neglecting self-weight and assuming the lumped masses are at the floor levels, determine the natural frequencies of the structure. For each frequency obtained, specify the standardized displacements of the floors as well as equivalent forces generated using the elastic response spectrum according to the standard SIA 261/1.2003.