介绍
在结构工程领域,准确预测风对结构的影响对于确保安全和性能至关重要。 为了提高CFD模拟的可靠性,必须对实验或现场测量的数据进行验证(图01)。 本常见问题解答概述了在 RWIND 中使用验证数据获得可靠结果的过程.
验证示例的重要性
验证是任何模拟过程中的关键步骤。 这样可以确保模型准确地反映真实情况。 通过将模拟结果与实验数据进行比较,工程师们可以找出差异并改进模型,从而得到更准确的预测。
分步介绍在 RWIND 中使用验证数据
1.准备实验数据
通过风洞测试或现场测量获得风压分布。 在这个例子中,我们使用的风压数据来自探测点的实验数据。
Convert the data into including coordination of point probes and experimental wind pressure with a format compatible with RWIND, you can also easily transfer data by using copy-paste option (Image 02).
2.在RWIND中设置模型
- 新建项目: 打开 RWIND 新建工程。
- 导入验证示例的几何尺寸。
- 定义模拟参数: 可以在这里设置区域大小、边界条件、网格密度、风廓线和湍流强度。
3 结果和插值方法
RWIND 中提供两种插值方法: diffusion interpolation and Gaussian interpolation kernel (Image 03). 必须为所有探测选择一种方法(见
知识库文章 1871
)[SCHOOL.INSTITUTION] It is possible to transfer experimental wind load data by using the interpolation method in order to structural analysis and design in RFEM.
扩散法是将数据从“源”点开始分布在整个面上。 适用于对测点密集的网格。 In the case of thin open structures, this method only interpolates the values on one side of the plate. It is possible to transfer the experimental wind load by using the motioned technique in order to perform structural analysis and design.
Here is the results for the diffusion interpolation (Image 04):
The calculation of statistical parameters and the related diagram are also provided manually to show how much the RWIND results and the experimental results are close to each other. The Simplified Mesh RWIND simulation data shows a slightly better correlation with the experimental wind pressure data than the Exact Mesh RWIND data (Image 05). 计算结果与实验数据相符,从而使 RWIND 成为预测风压的可靠工具。 The high statistical values (R and R2) demonstrate that both simulation approaches can effectively replicate the experimental wind pressure results, with the Simplified Mesh performing slightly better (Image 06).
概述总结
将验证数据集成到RWIND中是实现准确可靠的风流预测的关键一步。 通过系统地准备、导入实验数据,并将实验数据与仿真结果进行比较,工程师们可以不断完善模型,确保安全有效地进行设计。 这样不仅可以提高 RWIND 模拟的可靠性,也有助于结构工程实践的全面发展。
显示更多