La structure est composée d'une poutre profilée en I et de deux poutres treillis tubulaires. La structure contient plusieurs imperfections et est chargée par la force Fz. Le poids propre est négligé dans cet exemple. Déterminez les flèches uy et uz ainsi que la rotation axiale φx au point de fin (point 4). L'exemple de vérification est basé sur l'exemple introduit par Gensichen et Lumpe.
Dans cet exemple de vérification, les valeurs de calcul de capacité des efforts tranchants sur les poutres sont calculées selon l'EN 1998-1, 5.4.2.2 et 5.5.2.1 ainsi que les valeurs de calcul de capacité des poteaux en flexion selon 5.2.3.3(2 ). Le système est composé d'une poutre en béton armé à deux travées de 5,50 m de long Cette poutre fait partie d'un système de portique. Les résultats obtenus sont comparés avec ceux de [1].
Un poteau central a été installé au premier étage d'un bâtiment de trois étages. Le poteau est monolithique avec des poutres supérieures et inférieures. La méthode simplifiée de vérification de la résistance au feu A pour les poteaux selon l'EC2-1-2 a ensuite été vérifiée et les résultats ont été comparés à {%}[#Refer [1]]].
A structure is made of four truss members, which are embedded into hinge supports. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point, when snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. Le poids propre est négligé dans cet exemple. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at given deflections.
Un poteau est composé d'une section en béton (rectangle 100/200) et d'une section en acier (profilé I 200). It is subjected to pressure force. Determine the critical load and corresponding load factor. The theoretical solution is based on the buckling of a simple beam. In this case, two regions have to be taken into account due to different moments of inertia and material properties.
Une poutre courbe est composée de deux poutres de section rectangulaire. The horizontal beam is loaded by distributed loading. While neglecting self-weight, determine the maximum stress on the top surface of the horizontal beam.
Quatre poteaux sont encastrés en bas et reliés par un bloc rigide en haut. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.