Una trave curva è costituita da due travi a sezione rettangolare. The horizontal beam is loaded by distributed loading. While neglecting self-weight, determine the maximum stress on the top surface of the horizontal beam.
Un oscillatore semplice è costituito dalla massa m (considerata solo nella direzione x) e dalla molla lineare di rigidezza k. The mass is embedded on a surface with Coulomb friction and is loaded by constant-in-time axial and transverse forces.
Una parete in muratura è esposta a un carico distribuito al centro della sua sezione superiore. The Isotropic Masonry 2D material model is compared with the Isotropic Linear Elastic model, with surface stiffness property Without Tension in the nonlinear calculation.
Un blocco tridimensionale in materiale elastico-plastico è fissato ad entrambe le estremità. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai-Wu plasticity theory.
Una trave di legno rinforzata da due piastre di acciaio alle estremità è caricata da pressione. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.
Una trave di legno rinforzata da due piastre di acciaio alle estremità è caricata da pressione. The wood fibers are parallel to the upper loaded side of the beam. The plastic surface is described according to the Tsai-Wu plasticity theory.
Un blocco tridimensionale in materiale elastico-plastico con indurimento è fissato su entrambe le estremità. The block's middle plane is subjected to a pressure load. The surface plasticity is described according to the Tsai‑Wu plasticity theory.
Determina l'inflessione massima di un blocco tridimensionale fissato ad entrambe le estremità. The block is divided in the middle: the upper half is made of an elastic material and the lower part is made of timber - an elasto-plastic othotropic material with the yield surface described according to the Tsai-Wu plasticity theory. The block's middle plane is subjected to vertical pressure.
Una membrana è tesa mediante precompressione isotropa tra due raggi di due cilindri concentrici che non giacciono in un piano parallelo all'asse verticale. Find the final minimum shape of the membrane - the helicoid - and determine the surface area of the resulting membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.