Una soletta in cemento armato all'interno di un edificio deve essere progettata come una striscia di 1,0 m con aste. Il solaio ha una campata uniassiale e corre attraverso due campate. La soletta è fissata su pareti in muratura con appoggi a rotazione libera. Il vincolo centrale ha una larghezza di 240 mm e i due vincoli esterni hanno una larghezza di 120 mm. Le due campate sono soggette a un carico imposto di categoria C: aree di congregazione.
Una struttura poco profonda simmetrica è composta da otto aste reticolari uguali, che sono incorporate nei supporti delle cerniere. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point when the snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at the given deflections.
Una struttura è composta da quattro aste reticolari, che sono incastonate nei vincoli esterni delle cerniere. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point, when snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at given deflections.
A cantilever beam with an I-beam cross-section of length L is defined. The beam has five mass points with masses m acting in the X-direction. Il peso proprio è trascurato. The frequencies, mode shapes, and equivalent loads of this 5-DOF system are analytically calculated and compared with the results from RSTAB and RFEM.
Determina analiticamente la costante di torsione per la sezione trasversale del tubo (area anulare) e confronta i risultati con la soluzione numerica in RFEM 5 e RSTAB 8 per vari spessori di parete.