Dimostra che l'accoppiamento di diversi elementi dimensionali non influisce sui risultati. A cantilever with a rectangular cross-section is fixed at one end and loaded at the other by concentrated forces. Neglecting its self-weight and assuming only small deformations, determine the cantilever's maximum deflections.
Das Architectural Institute of Japan (AIJ) ha una revisione del benchmark Benchmark-Szenarien für Windsimulation vorgestellt. Der Nachfolgende Beitrag dreht sich dabei um den "Caso A - grattacielo con forma 2:1:1". Im Folgenden wird das beschriebene Szenario in RWIND2 nachgebildet und die Ergebnisse mit den simulierten und der experimentellen Resultate des AIJ verglichen.
Una piastra rettangolare semplicemente supportata è soggetta a diversi tipi di carico. Assuming only the small deformation theory and neglecting self-weight, determine the deflection at its centroid for each load type.
Uno sbalzo in acciaio con una sezione trasversale rettangolare è completamente fissato su un lato e libero sull'altro. The aim of this verification example is to determine the natural frequencies of the structure.
Una forza concentrata viene applicata per un breve periodo di tempo a metà campata di una trave semplicemente vincolata. Considering only the small deformation theory and assuming that the mass of the beam is concentrated at its mid‑span, determine its maximum deflection.
Un'asta ASTM A992 a forma di W è selezionata per sopportare un carico permanente di 30.000 kip e un carico variabile di 90.000 kip in trazione. Verificare la resistenza dell'asta utilizzando sia LRFD che ASD.
Un'asta ASTM A992 a forma di W è selezionata per sopportare un carico permanente di 30.000 kip e un carico variabile di 90.000 kip in trazione. Verify the member strength using both LRFD and ASD.
Uno sbalzo sandwich è costituito da tre strati (il nucleo e le due facce). È fissato sull'estremità sinistra e caricato da una forza concentrata sull'estremità destra.
Uno sbalzo a parete sottile di un profilo QRO è completamente fissato all'estremità sinistra e l'ingobbamento è abilitato. The cantilever is subjected to torque. Small deformations are considered, and the self-weight is neglected. Determine the maximum rotation, primary moment, secondary moment, and warping moment. The verification example is based on the example introduced by Gensichen and Lumpe.
L'esempio di verifica confronta il calcolo del carico del vento su un edificio con una copertura a due falde utilizzando la norma EN 1991-1-4 e utilizzando la simulazione CFD in RWIND Simulation. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
L'esempio di verifica confronta il calcolo del carico del vento su un edificio con una copertura piana utilizzando la norma EN 1991-1-4 e utilizzando la simulazione CFD in RWIND Simulation. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
Questo esempio di verifica confronta i calcoli del carico del vento su un edificio con copertura a due falde utilizzando la norma ASCE 7-16 e utilizzando la simulazione CFD in RWIND Simulation. The building is defined according to the sketch and the inflow velocity profile taken from the ASCE 7-16 standard.
Questo esempio di verifica confronta i calcoli del carico del vento su un edificio con copertura piana utilizzando la norma ASCE 7-16 e utilizzando la simulazione CFD in RWIND Simulation. The building is defined according to the sketch and the inflow velocity profile taken from the ASCE 7-16 standard.
L'esempio di verifica descrive il flusso in stato stazionario attorno a un edificio isolato (modello in scala).L'esempio è fornito dall'Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
L'esempio di verifica descrive i carichi di pressione sulle pareti di edifici in disposizione in tandem situati a livello del suolo. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
A cantilever beam with an I-beam cross-section of length L is defined. The beam has five mass points with masses m acting in the X-direction. Il peso proprio è trascurato. The frequencies, mode shapes, and equivalent loads of this 5-DOF system are analytically calculated and compared with the results from RSTAB and RFEM.
Una mensola costituita da una barra tonda è caricata da una forza trasversale eccentrica. Determine the maximum deflection and maximum twist of the console using the geometrically linear analysis.
Una forza concentrata viene applicata improvvisamente a metà campata di una trave semplicemente supportata in un dato momento. Considering only the small deformation theory, determine the maximum deflection of the beam.
Un compact disc (CD) ruota ad una velocità di 10.000 giri/min. Therefore, it is subjected to centrifugal force. The problem is modeled as a quarter model. Determine the tangential stress on the inner and outer diameters and the radial deflection of the outer radius.